SFR25H0007501JR500

Series:	SFR25H
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	7.5 kOhms
Tolerance:	±5%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.098" Dia x 0.256" L (2.50mm x 6.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are among the most common passive electronic components in use today. The SFR25H0007501JR500 through hole resistor is a particularly popular choice due to its versatile design and variety of applications. This article will discuss the application field and working principle of the SFR25H0007501JR500 through hole resistor in greater detail.The SFR25H0007501JR500 through hole resistor is typically used in low-current, low-voltage applications when a resistor needs to be mounted directly onto a printed circuit board (PCB). This type of resistor features two diameter columns with a gap between them which, when connected to a PCB, form a mountable connection point. The two columns are connected via a metal oxide layer, which provides electrical conduction through the resistor. The resistor also features a terminal end, which is used to connect to the PCB.In terms of its application fields, the SFR25H0007501JR500 through hole resistor is most commonly used in combination with semiconductor components such as diodes and transistors, and are commonly found in various electronic circuits and signal-processing circuits. These components are popular in industrial and automotive applications for a variety of reasons, including their superior electrical performance, affordability, and ease of installation.The working principle behind the SFR25H0007501JR500 through hole resistor is relatively simple. Basically, when the two columns are connected to the PCB, an electric current is created which passes through the metal oxide layer. This current then passes through the resistor, and its resistance to current flow affects the signal. The higher the resistance in the resistor, the lower the amount of current that will be able to pass through the resistor. The amount of resistance can be adjusted through the use of a trimming potentiometer, which allows the user to fine-tune the amount of current passing through the resistor.Due to its versatility, the SFR25H0007501JR500 through hole resistor is a popular choice for a variety of uses. Some of the most common applications include automotive systems, lightning protection systems, industrial motor control systems, and industrial signal-processing systems. The resistor is also often used in computer systems, as well as in audio systems for volume control.In terms of its working principle, the SFR25H0007501JR500 through hole resistor is one of the most reliable and cost-effective methods of adjusting the amount of current passing through a particular component. As such, these types of resistors are widely used in a variety of applications where precision and reliability are paramount. The versatility and ease of installation of this type of resistor make it an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description