| Allicdata Part #: | SE1743-ND |
| Manufacturer Part#: |
SG-51P 24.5760MC |
| Price: | $ 0.00 |
| Product Category: | Crystals, Oscillators, Resonators |
| Manufacturer: | Epson |
| Short Description: | OSC XO 24.576MHZ CMOS TTL PC PIN |
| More Detail: | 24.576MHz XO (Standard) CMOS, TTL Oscillator 5V En... |
| DataSheet: |  SG-51P 24.5760MC Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Frequency Stability: | ±100ppm |
| Current - Supply (Disable) (Max): | 12mA |
| Height - Seated (Max): | 0.209" (5.30mm) |
| Size / Dimension: | 0.780" L x 0.250" W (19.81mm x 6.36mm) |
| Package / Case: | 14-DIP, 4 Leads (Full Size) |
| Mounting Type: | Through Hole |
| Ratings: | -- |
| Current - Supply (Max): | 23mA |
| Operating Temperature: | -20°C ~ 70°C |
| Series: | SG-51 |
| Voltage - Supply: | 5V |
| Output: | CMOS, TTL |
| Function: | Enable/Disable |
| Frequency: | 24.576MHz |
| Type: | XO (Standard) |
| Base Resonator: | Crystal |
| Part Status: | Obsolete |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are devices that are used to incorporate an inherent periodic signal in order to generate a continuous wave of their own, often at our desired frequency. A typical example, the SG-51P 24.5760MC oscillator, is one such oscillator. Its application field and working principle are discussed below.
Application Field
The SG-51P 24.5760MC is widely used in radar systems, broadcast equipment, digital processing circuits and other specialized electronic systems. It can also be used in low-frequency amplitude-modulated radio transmitters, as well as for generative purposes. The main use of this oscillator is in the field of telecommunications, where it is deployed to generate the precise, stable frequency signal required to drive close-loop frequency control systems.
Working Principle
The SG-51P 24.5760MC oscillator operates on the basis of a resonant circuit. The resonant circuit consists of a quartz crystal and an off-chip circuit that requires two capacitors, two inductors, and one resistor. The quartz crystal functions as the oscillator’s frequency source and provides the necessary stability to the signal.
The quartz crystal is connected to the oscillator circuit and the rest of the components are connected in the conventional oscillator configuration in order to obtain the necessary amplification. The off-chip components can be adjusted to fine-tune the frequency so that it is has a close match to the crystal oscillator frequency.
The oscillator picks up the signal from the crystal oscillator and amplifies it before returning it to the crystal oscillator. This creates current reversal effects, which causes the oscillation of the frequency to occur. The oscillation then takes place at the base frequency of the crystal oscillator, plus or minus the frequency shifts created by any variation in the other components employed.
Conclusion
The SG-51P 24.5760MC oscillator is popular for its stable output frequency and excellent frequency-tuning resolution. Its wide application field and simple working principle have made it a sought after component for many electronic systems.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...