SG-615PTJ 40.0000MB: ROHS

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	30mA
Height - Seated (Max):	0.185" (4.70mm)
Size / Dimension:	0.551" L x 0.341" W (14.00mm x 8.65mm)
Package / Case:	4-SOJ, 5.08mm pitch
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	45mA
Operating Temperature:	-20°C ~ 70°C
Series:	SG-615PTJ
Frequency Stability:	±50ppm
Voltage - Supply:	5V
Output:	CMOS, TTL
Function:	Enable/Disable
Frequency:	40MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Not For New Designs

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

OscillatorsSG-615PTJ 40.0000MB: ROHS is a type of oscillator, an electrical circuit that generates a continuous, periodic, alternating waveform. Oscillators are widely used in electronics, from clocks and their components to communication systems to audio processing and power supplies.An important application of oscillators is in the timing of sequential logic. In this application, an oscillator is used to generate a constant frequency clock signal, which is used to drive a counter that records the number of cycles that have elapsed since the clock signal was first generated. This provides a way of dividing a logical process into time slices, or ‘clocks’, so that a computer or digital system can execute its instructions in sequence.More specifically, the SG-615PTJ 40.0000MB: ROHS oscillator is a surface mount Crystal Oscillator which uses quartz crystal technology for frequency stability and accuracy. This type of oscillator consists of a quartz crystal and two electronics components, the amplifying circuit and the tuning circuit. The quartz crystal vibrates at a certain frequency determined by its cut and size. The amplifying circuit amplifies the quartz vibration to drive it through the tuning circuit, where its frequency is adjusted to the desired frequency. The output waveform of the oscillator is usually a sinusoid or a square wave, generated by a selector circuit which selects either the direct output of the quartz oscillator or an inverted version of the same signal.In terms of typical applications for the SG-615PTJ 40.0000MB: ROHS oscillator, this type of oscillator is typically used in applications such as timing circuits, audio processing, motor control, power supplies, and so on. In addition, due to its RoHS (Restriction on the use of hazardous substances) compliance, this oscillator can be used in an environmentally-friendly manner.With regards to advantages of the SG-615PTJ 40.0000MB: ROHS oscillator, the primary benefit of this type of oscillator is its small size, which makes it suitable for space-constrained applications. Additionally, due to its quartz crystal technology, this oscillator offers frequency stability and accuracy and requires minimal adjustments for maintaining desired accuracy. Furthermore, this oscillator is RoHS compliant which makes it suitable for environmentally friendly applications as well.Finally, SG-615PTJ 40.0000MB: ROHS oscillators are widely used in a variety of applications due to their small size, frequency stability, accuracy, and environmental compliance. It is a popular choice for both commercial and consumer applications.

The specific data is subject to PDF, and the above content is for reference