SG-636PCE 24.0000MC0:ROHS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices used to generate a steady frequency, typically for output ‘clocking’ or ‘timing’ signals. In its most basic form, an oscillator is a circuit which has a feedback loop which will reinforce a stable frequency. SG-636PCE 24.0000MC0:ROHS is a representative of oscillators.

Application Field

SG-636PCE 24.0000MC0:ROHS is a highly stable oscillator suitable for nearly all standard applications, including frequency control in telecom, laboratory, RF communication systems, and consumer electronics. Its 3.3V output and wide frequency range from 1.2kHz to 636 MHz enable it to cover most basic and advanced applications. It is RoHS compliant and therefore suitable for most modern electronics.

Working Principle

The oscillators are based on the principle of negative resistance. Within the oscillator circuit, an active device, such as a BJT, MOSFET, or FET is used to create a circuit with negative resistance. This acts as a stable generator, producing a continuous frequency. The frequency of the output is determined by the design parameters of the oscillator. The SG-636PCE 24.0000MC0:ROHS implements a design which allows for a 3.3V output and a wide frequency range.

SG-636PCE 24.0000MC0:ROHS uses an active device to form an amplifier/oscillator circuit. An input signal, typically a square wave, is injected into the circuit and used to feedback the circuit, amplifying the oscillations. The output of the oscillator is taken from the circuit which is then in an oscillation state and produced at a fixed frequency.

The components used in the frequencies, such as capacitors and resistors, help to determine the output frequency of the SG-636PCE 24.0000MC0:ROHS. The active device and feedback network set up the gain, impedance, and stability of the overall oscillator circuit. The gain can be adjusted by changing the active device or its biasing. The output frequency can be adjusted by changing the circuit components such as the capacitors and resistors in the circuit.

Conclusion

SG-636PCE 24.0000MC0:ROHS is a highly stable oscillator which is suitable for many different applications. It is based on the principle of negative feedback which is used to reinforce a continuous frequency at a rate determined by the design parameters of the oscillator. The components, active device and biasing used in the design contribute to the oscillator’s output frequency and gain. SG-636PCE 24.0000MC0:ROHS is RoHS compliant, making it the ideal oscillator for most modern electronics.

The specific data is subject to PDF, and the above content is for reference