SG-710ECK 11.0592MM

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.287" L x 0.189" W (7.30mm x 4.80mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	8mA
Operating Temperature:	-40°C ~ 85°C
Series:	SG-710
Frequency Stability:	±100ppm
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	11.0592MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Obsolete

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SG-710ECK oscillator series is a range of general-purpose quartz crystal resonators designed for low power and high frequency applications. The SG-710ECK series is suitable for a wide range of frequency stability requirements and offers a wide range of performance characteristics, including very low power operation, low phase noise, and precise frequency tracking.

Introduction

The SG-710ECK provides a very small surface-mount package with excellent electrical performance. Utilizing a low-profile ceramic case, the SG-710ECK measures just 11.0592mm in diameter, making it the smallest quartz crystal oscillator package currently available in the market. It is available in a wide range of frequencies from 10 kHz up to 200 MHz and various temperature coefficients and other options.The SG-710ECK series is a highly reliable, low power quartz crystal oscillator designed to meet today’s demanding applications. It can operate at voltages as low as 1.8V and draw as little as 5mA of current. Its very low phase noise makes it ideal for use in mobile communications and GPS applications, where low power and low phase noise are required.

Application Fields and Market Segments

The SG-710ECK is well-suited for a variety of applications due to its excellent electrical performance. It is particularly suited for use in mobile communications, GPS applications, and high speed data communications. It can also be used for clock and timing applications in consumer electronics, medical equipment, automotive technologies, and other industrial and military applications.

Working Principle

The SG-710ECK is a quartz crystal oscillator that converts electrical energy into mechanical energy in the form of acoustic waves, which then creates a frequency. An oscillator is composed of a quartz element inside a housing, an electronics circuit, and a housing or frame.The quartz element consists of a quartz crystal with a metalized pattern on each side. Electricity applied to the metalized pattern causes the quartz crystal to vibrate at a particular frequency. This can be adjusted by changing the capacitance or inductance of the associated electronics circuit.When the SG-710ECK oscillator is connected to a circuit, the frequency of the quartz crystal is output from the oscillator. This frequency, often referred to as the reference frequency, is used to control the speed and accuracy of the system. Other devices, such as logic gates, can be synchronized with the SG-710ECK, making sure that the entire system is operating in sync.

Conclusion

The SG-710ECK is a low power quartz crystal oscillator that is suitable for a wide range of applications. It offers excellent electrical performance, very low power consumption, and low phase noise that makes it ideal for use in mobile communications and GPS applications. Its small size and high frequency stability makes it well-suited for use in consumer electronics, medical equipment, automotive technologies, and other industrial and military applications.

The specific data is subject to PDF, and the above content is for reference