SG-710ECK 14.31818MB

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.287" L x 0.189" W (7.30mm x 4.80mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	8mA
Operating Temperature:	-10°C ~ 70°C
Series:	SG-710
Frequency Stability:	±50ppm
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	14.31818MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Obsolete

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

A wide range of electronic oscillators is available today. The SG-710ECK 14.31818 MHz application field and working principle is one of the oscillator manufacturer\'s usual list.A 14.31818 MHz oscillator is used in applications such as quartz crystal clocks, crystal filters, and frequency counters. It is also used in many other circuits involving precise timing or frequency control such as television tuners, FM radio, etc.The working principle of a 14.31818 MHz oscillator is based on a quartz crystal. The quartz crystal is a piezoelectric material and has special properties, such as high stability of frequency and phase over time and temperature, that make it useful in oscillator circuit designs.When electric field is applied to a quartz crystal it begins to resonate at its natural frequency. If the electric field is able to maintain an alternating current flow back and forth across the crystal, an oscillation occurs. An electrical circuit connected to the crystal is used to maintain the alternating current flow.In 14.31818 MHz crystal oscillator circuit, a small quartz crystal is connected in parallel with a tuned L-C circuit. The L-C circuit consists of a coil and a capacitor.It is arranged such that the Quartz crystal and the Coil/Capacitor are connected in parallel and in series respectively with the oscillator’s power supply.The quartz crystal acts as a frequency shifter due to its piezoelectric effect. When voltage is applied to it, the crystal behaves like a capacitor in series with a coil and resonates with its own frequency. At resonance, the crystal builds up a higher voltage at its output. This signal is also fed back to a transistor whose collector is connected to an output node. The output node is connected to an amplifier that amplifies the signal and produces a 14.31818 MHz sine wave at its output.The tunedL-C circuit helps adjust the load to the crystal, thus adjusting the oscillation frequency.It is also used to increase the frequency stability, since the crystal frequency is prone to changes with temperature and voltage. The circuit works in such a way that the frequency of the crystal oscillator is varied in such a range that the electronics parts used in connection with the crystal, can function and the feedback circuit can also work properly.In addition to the electric field used to maintain oscillation, an electronic feedback loop helps ensure the oscillator\'s timing is stable over variations in environmental conditions. This is done by comparing the output of the oscillator to an internal reference frequency and adjusting the oscillator as needed.In summary, the SG-710ECK 14.31818 MHOscillator is mainly utilized in circuits that require precise timing and frequency control. Its quartz crystal is used to produce a precise frequency, and an electronic feedback loop helps maintain its accuracy. Its tuned L-C circuit helps to adjust the load to the crystal, thus providing frequency stability.

The specific data is subject to PDF, and the above content is for reference