Allicdata Part #: | SG-8002CA20.0000M-PTML2-ND |
Manufacturer Part#: |
SG-8002CA 20.0000M-PTML2 |
Price: | $ 1.87 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | OSC XO 20MHZ CMOS SMD |
More Detail: | 20MHz XO (Standard) CMOS Oscillator 5V Enable/Disa... |
DataSheet: | SG-8002CA 20.0000M-PTML2 Datasheet/PDF |
Quantity: | 1000 |
500 +: | $ 1.68336 |
Absolute Pull Range (APR): | -- |
Current - Supply (Disable) (Max): | 30mA |
Height - Seated (Max): | 0.059" (1.50mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 45mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | SG-8002CA |
Frequency Stability: | ±100ppm |
Voltage - Supply: | 5V |
Output: | CMOS |
Function: | Enable/Disable |
Frequency: | 20MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators
SG-8002CA 20.0000M-PTML2 is a type of oscillator, which is an electronic device used to measure time or frequency. This type of oscillator utilizes an electronic oscillator circuit with a wide range of frequency outputs and is ideal for use in any environment where precise timing or measurements are needed.
An oscillator consists of three main components. The first is an electronic circuit, usually consisting of one or two transistors and passive components such as resistors, capacitors and inductors. The second component is a type of energy source, typically in the form of an electrical power supply, and the third is a signal or waveform generator, which creates a repeating signal or waveform. This type of signal generator is commonly referred to as an oscillator.
The SG-8002CA 20.0000M-PTML2 oscillator has two specific application fields. First, they are often used to measure the period, amplitude and frequency of electronic signals. This can be used for analyzing logic signals, for signal processing in industrial applications, and even in scientific research.Secondly, this type of oscillator can also be used to generate a stable signal in instrumentation applications, such as audio equipment, digital clocks, and test equipment.
The working principle of SG-8002CA 20.0000M-PTML2 oscillator is based on the concept of negative feedback, which is a process in which a portion of the output signal is fed back into the input of the oscillator circuit. When this happens, the frequency of the output will be constant, thus providing a stable timing or measurement source. This type of oscillator uses an output stage that amplifies the input signal and then feeds a portion of it back into the input stage.
The output stage also contains an integrator that accumulates the feedback loop, maintaining stability in frequency. This feedback method acts as a type of feedback control mechanism that helps keep the circuit stable. In some cases, the output phase of the oscillator may be shifted from negative to positive in order to reduce the effects of noise or other disturbances on the output signal.
The SG-8002CA 20.0000M-PTML2 oscillator has several advantages that make it suitable for its applications. It is cost effective, since it does not require additional circuitry or components. Furthermore, its output is stable, since it uses the negative feedback mechanism to maintain constant frequency. It can also be used in a wide variety of applications, such as industrial devices, radio receivers, navigation systems and electronic circuit test equipment.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...