SG-8002CA 24.5760M-PCCL3

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	16mA
Height - Seated (Max):	0.059" (1.50mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	28mA
Operating Temperature:	-20°C ~ 70°C
Series:	SG-8002CA
Frequency Stability:	±100ppm
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	24.576MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic devices which generate repeating signals over a certain range of frequencies. They can be used in a variety of applications, such as radio communication, audio-amplification circuits, and control circuit applications. A commonly used oscillator type is the SG-8002CA 24.5760M-PCCL3, which is a CMOS oscillator designed for integrated circuit applications.This oscillator uses a crystal-based resonator for frequency control, which is an extremely precise and stable method of frequency control. The silicon substrate thin-film resonator is connected in resonance through a coupling plate, and the clock signal is output from the oscillator. The oscillator has a selectable operating frequency range between 24.5760MHz and 24.576MHz ± 100ppm. The value of the crystal is usually pre-set at 24.576 MHz and can be adjusted with a frequency trimmer if necessary. It also has the ability to be programmed to different operating frequencies, so it can be easily adapted to different applications. The SG-8002CA 24.5760M-PCCL3 is mainly used in digital circuit applications, such as MCUs and DSPs. It is an ideal solution for embedded systems, if the required frequency is fixed. The oscillator can be used in a variety of applications, such as timing and system clock control, voltage-control oscillator (VCO) applications, microprocessor control systems, ASICs, data converters, embedded systems, LCD and LED display systems, consumer electronic products, and communication applications. It can also be used in automotive electronics, industrial control systems, and robotics. The oscillator can be used to provide a low-frequency reference signal for frequency synthesis systems, as well as to provide a stable, low-jitter timing signal for frequency division applications. By using the internal phase-locked loop circuitry, the SG-8002CA 24.5760M-PCCL3 can produce a high-stability output frequency even in noisy environments. This makes it suitable for use in systems where stability and precision are paramount. In conclusion, the SG-8002CA 24.5760M-PCCL3 is a versatile clock oscillator which has a wide range of applications. Its precision frequency control and selectable frequency range makes it ideal for embedded system clock control and frequency synthesis applications.

The specific data is subject to PDF, and the above content is for reference