SG-8002CA 60.0000M-PCML0 Crystals, Oscillators, Resonators

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	16mA
Height - Seated (Max):	0.059" (1.50mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	28mA
Operating Temperature:	-40°C ~ 85°C
Series:	SG-8002CA
Frequency Stability:	±100ppm
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	60MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of Oscillators
Oscillators are devices that produce periodic electrical signals. They are essential components of countless systems in a variety of applications from consumer electronics to industrial machinery. Oscillators come in a variety of configurations, such as voltage-controlled oscillators (VCOs), phase locked loops (PLLs), and crystal oscillators (XOs). Among them, SG-8002CA 60.0000M-PCML0 is a special type of oscillator. 

Application Field of SG-8002CA 60.0000M-PCML0

SG-8002CA60.0000M-PCML0 is a type of crystal oscillator with a low phase noise(PN) and wide operating frequency range(18 to 80MHz). It is suitable for a variety of applications such as wireless communications, military, and medical systems. It features high reliability, low power consumption, good stability and long service life. This oscillator is also resistant to shock, vibration, and temperature fluctuations. As a result, it can be used in harsh environments.

Working Principle of SG-8002CA 60.0000M-PCML0

SG-8002CA 60.0000M-PCML0 utilizes properly designed oscillation circuits to provide the oscillating signal. The core of the oscillator circuit is a quartz crystal, selected to provide the required frequency of operation. The signal output from the oscillator can be either sine wave or square wave. The main components of the oscillator are the crystal, resistor, capacitor, and an amplifier. When the power switch is turned on, the voltage from the power source is supplied to the amplifier. The amplifier amplifies the sinusoidal signal, which is then fed to the quartz crystal. The quartz crystal filters and transmits the signal to the capacitor, and the capacitor filters out the harmonic components in the signal thereby leaving only the desired frequency. The output signal, after passing through the resistor, is amplified by the amplifier to the required magnitude. This amplified signal is then supplied to the output pin.

Conclusion

The SG-8002CA60.0000M-PCML0 crystal oscillator is a low phase noise and wide operating frequency range oscillator. It is suitable for a variety of applications such as wireless communications, military, and medical systems. It is a reliable and robust oscillator which can operate in harsh environments. The oscillator consists of various components such as the quartz crystal, capacitor, resistor and amplifier, and it works by using the principal of resonance.

The specific data is subject to PDF, and the above content is for reference