SG-8002CA-PHC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SG-8002CA-PHC is a type of programmable oscillator, which is a type of oscillator that can be programmed to generate a certain frequency output with a wide range of frequency range options to choose from. It is a quartz-based oscillator and has a range of frequencies from 50kHz to 200MHz. It can be used in a variety of applications, such as timers, frequency counters, microprocessors, memory circuits, and communication systems. The SG-8002CA-PHC have a fixed quartz-based oscillator core with a small chip for the programming logic and a set of resistors for frequency setting.

The SG-8002CA-PHC oscillator consists of a quartz crystal, a small programming chip, a set of capacitor and resistors, and a connector for connecting to the circuit to be controlled. The quartz crystal acts as the resonator for the oscillator and is capable of maintaining a stable frequency over a wide temperature range. The programming chip is responsible for setting the oscillator frequency. The capacitor- and resistor-based networks act as frequency-selective networks, allowing the programming chip to select the desired frequency.

The SG-8002CA-PHC has a wide range of applications, such as in microprocessor-based systems and memory circuits where it is used to generate the clock signal needed to synchronize the operations of the system. It is also used in communication systems, where it is used to generate the signal needed to modulate the data on a radio frequency carrier. Additionally, it can be used in frequency counters to measure the frequency of a signal or in timers to generate a trigger pulse at predetermined times.

The SG-8002CA-PHC operating principle is fairly simple. The quartz oscillator is connected to the analog input of a digital signal processing block (DSP). The DSP is then used to generate the programming signal for the programming logic which sets the frequency of the oscillator. The DSP is also used to provide a digital readout of the frequency set by the programming logic. The oscillator then produces a signal of the set frequency.

In summary, the SG-8002CA-PHC is a programmable oscillator which can be used in a range of applications, from microprocessor-based systems and communication systems to frequency counters and timers. It operates by connecting a quartz crystal to the analog input of a digital signal processing block, which generates the programming signal and provides a digital readout of the set frequency. The oscillator then produces the signal of the set frequency.

The specific data is subject to PDF, and the above content is for reference