SG-8002JA 51.1650M-PCMB ROHS

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	16mA
Height - Seated (Max):	0.185" (4.70mm)
Size / Dimension:	0.551" L x 0.341" W (14.00mm x 8.65mm)
Package / Case:	4-SOJ, 5.08mm pitch
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	28mA
Operating Temperature:	-40°C ~ 85°C
Series:	SG-8002JA
Frequency Stability:	±100ppm
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	51.165MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: SG-8002JA 51.1650M-PCMB ROHS

Oscillators are electrical or mechanical parts that generate an oscillating signal with a defined period and a defined amplitude. They are generally used to generate a clock signal for the clocking of digital systems such as computers, or to drive pulse width modulation (PWM) of motor speed control. Oscillators can also be used to generate repetitive signals and frequency measurements.The SG-8002JA 51.1650M-PCMB ROHS oscillator is a device specifically designed for oscillator applications. It is a small, low-cost, easy-to-use, high-frequency, surface-mountable quartz oscillator. It has a frequency range of 32 kHz to 200 MHz, a tolerance of less than ± 10 ppm, and a typical phase noise of -85 dBc/Hz. The SG-8002JA 51.1650M-PCMB ROHS oscillator is also RoHS compliant, which makes it suitable for use with RoHS-regulated products.The primary application areas for the SG-8002JA 51.1650M-PCMB ROHS oscillator include clock synchronization, waveform generation, and frequency multiplication or division. It is used in a wide range of applications, such as frequency synthesisers, digital circuit design, microcontrollers, data clocks, and computer system clocks. It is also used in baseband signal processing, or in clock/data recovery systems for MPEG video.The working principle of the SG-8002JA 51.1650M-PCMB ROHS oscillator is based on a quartz crystal, which forms the resonator of the device. The quartz crystal is placed between two electrodes, and a small AC electrical signal, known as a feedback signal, is applied to the electrodes. This causes the crystal to vibrate at its necessary frequency, and generates an oscillating electrical signal. The signal can then be amplified and used to drive the output.The SG-8002JA 51.1650M-PCMB ROHS oscillator is a simple and efficient device for a range of high-frequency oscillator applications. Its small size, low cost, and compliance with RoHS regulations make it a suitable choice for use with a variety of different products. The device\'s high frequency range, low tolerance, and low phase noise characteristics make it an ideal choice for use in demanding signal transmission and RF applications.

The specific data is subject to PDF, and the above content is for reference