
Allicdata Part #: | SG-8003CA-PEM-ND |
Manufacturer Part#: |
SG-8003CA-PEM |
Price: | $ 3.07 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | OSC PROG CMOS 1.8V 100PPM EN/DS |
More Detail: | XO (Standard) CMOS 1MHz ~ 166MHz Programmable Osci... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 2.76570 |
10 +: | $ 2.64789 |
50 +: | $ 2.53021 |
100 +: | $ 2.29484 |
500 +: | $ 2.17715 |
1000 +: | $ 1.94179 |
2500 +: | $ 1.82410 |
Frequency Stability: | ±100ppm |
Current - Supply (Disable) (Max): | 8mA |
Height: | 0.055" (1.40mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 10mA |
Spread Spectrum Bandwidth: | -- |
Operating Temperature: | -40°C ~ 85°C |
Frequency Stability (Total): | -- |
Series: | SG-8003 |
Voltage - Supply: | 1.8V |
Output: | CMOS |
Function: | Enable/Disable |
Available Frequency Range: | 1MHz ~ 166MHz |
Programmable Type: | Programmed by Digi-Key (Enter your frequency in Web Order Notes) |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Not For New Designs |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Programmable oscillators are oscillators whose frequency and other parameters can be changed through programming. Programmable oscillators are commonly used when a device requires a source of timing or synchronization and the specified frequency, stability, and/or phase noise must be user adjustable. The SG-8003CA-PEM from Accutronics is an example of programmable oscillator, and this article will discuss its application and working principles.
Application: The SG-8003CA-PEM is a high-performance oscillator module that provides high frequency stability and performance in a standard 16-pin package. It is suitable for use in a variety of applications including communication equipment, medical devices, telecom systems, energy management devices and more. Some of the features of the SG-8003CA-PEM that make it suited for these applications include its low power consumption, small size, and the fact that it can be programmed for different frequencies.
Working Principle: The SG-8003CA-PEM utilizes a voltage-controlled oscillator (VCO) in conjunction with a low-noise voltage-to-frequency (V/F) converter. The V/F converter takes in a control voltage and produces a frequency output proportional to the voltage. This output is then fed into the VCO, which produces a stable output at a frequency determined by the control voltage. The SG-8003CA-PEM is designed to take an input voltage of 1.2V to 3.3V and produce a frequency output of between 5 and 800MHz.
In addition to the VCO, the SG-8003CA-PEM also utilizes an amplifier, mixer and two voltage tunable capacitors. The amplifier is used to increase the output signal of the VCO to the desired level. The mixer is used to convert the output signal of the VCO to the desired frequency range. The voltage tunable capacitors are used to adjust the frequency of the output signal to the desired frequency.
The SG-8003CA-PEM is a fully programmable oscillator with a range of settings that can be adjusted by the user. These settings include the output frequency, phase based-frequency adjustment, frequency adjustment in both short-term and long-term stability, ground shift and more. These settings allow the user to adjust the SG-8003CA-PEM for various applications.
The SG-8003CA-PEM also has an integrated trim tuning voltage regulator which allows for fine tuning of the output frequency. The regulator helps to minimize temperature drift, which can cause the oscillator to become unstable over time. The regulator also allows the oscillator to be used in extreme temperatures.
The SG-8003CA-PEM from Accutronics is an example of a programmable oscillator that is suited for a variety of applications that require user adjustable frequency, stability, and/or phase noise. The oscillator utilizes a VCO in conjunction with a V/F converter, an amplifier, mixer, and two voltage tunable capacitors to output a stable frequency over a wide range of temperatures. In addition, the integrated trim tuning voltage regulator helps to minimize temperature drift, ensuring stability over longterm use.
The specific data is subject to PDF, and the above content is for reference
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...
