SG-9101CA-C07SHCBB

Frequency Stability:	--
Current - Supply (Disable) (Max):	3.7mA
Height:	0.055" (1.40mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Spread Spectrum Bandwidth:	±0.75%, Center Spread
Operating Temperature:	-40°C ~ 105°C
Frequency Stability (Total):	--
Series:	SG-9101
Voltage - Supply:	1.62 V ~ 3.63 V
Output:	CMOS
Function:	Standby
Available Frequency Range:	670kHz ~ 170MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators

Programmable oscillators are a type of circuit that produces a periodic signal, usually a sine or square wave, that can be adjusted with external control signals. The most common applications of programmable oscillators use them as clock sources for digital systems, but they can also be used in a variety of other applications. The SG-9101CA-C07SHCBB oscillator is a commonly used programmable oscillator.

SG-9101CA-C07SHCBB Application Field

The SG-9101CA-C07SHCBB universal pitch oscillator is a series of programmable oscillators that are designed to provide a stable and accurate frequency output. It is commonly used in telecommunications and computer systems, primarily as the clock signals for digital logic circuits. It can also be used in high-performance audio systems, as well as low- power and low-cost systems.

SG-9101CA-C07SHCBB Working Principle

The SG-9101CA-C07SHCBB uses an on-board phase-locked loop (PLL) system to generate a clock output with a wide range of programmable frequencies. The frequency range is from 32.768 kHz to 200 MHz, and the oscillator can be digitally programmed via the on-board I²C interface. The frequency of the oscillator is set by loading a given frequency value into a control register on the chip, which is then sensed by the PLL and used to generate the appropriate clock output. The PLL in the oscillator also has an internal voltage-controlled oscillator (VCO) that is responsible for generating the reference clock signal. The VCO is driven by a voltage applied to its tuning port, and the frequency of this signal is then compared to the frequency set in the control register. This comparison is used to adjust the tuning voltage until the two frequencies match, at which point the PLL is locked into the correct frequency. The SG-9101CA-C07SHCBB has an integrated crystal oscillator that is used as the reference clock signal, which helps it to maintain a high degree of accuracy and stability. The oscillator also includes various power management features, such as dynamic voltage scaling, low-power operating modes, and programmable startup times. Additionally, it is designed to be easy to use and configure, with on-board commands for reading and writing registers, changing frequencies, and enabling and disabling the oscillator.

Conclusion

The SG-9101CA-C07SHCBB universal pitch oscillator is a commonly used programmable oscillator. It is used primarily as a clock source for digital systems, but can also be used in a variety of other applications. The oscillator uses an on-board phase-locked loop system to generate a clock output with a wide range of programmable frequencies, and is designed to be easy to use and configure. Additionally, it has an integrated crystal oscillator and various power management features, resulting in a high degree of accuracy and stability.

The specific data is subject to PDF, and the above content is for reference