Allicdata Part #: | SG-9101CB32.9970M-C20PHAAA5-ND |
Manufacturer Part#: |
SG-9101CB 32.9970M-C20PHAAA5 |
Price: | $ 3.47 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | OSC XO 32.9970MHZ CTR SPRD SMD |
More Detail: | 32.997MHz XO (Standard) CMOS Oscillator 1.62 V ~ 3... |
DataSheet: | SG-9101CB 32.9970M-C20PHAAA5 Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 3.14803 |
Absolute Pull Range (APR): | -- |
Current - Supply (Disable) (Max): | 3.7mA |
Height - Seated (Max): | 0.051" (1.30mm) |
Size / Dimension: | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 8.3mA |
Operating Temperature: | -40°C ~ 105°C |
Series: | SG-9101 |
Frequency Stability: | -- |
Voltage - Supply: | 1.62 V ~ 3.63 V |
Output: | CMOS |
Function: | Enable/Disable |
Frequency: | 32.997MHz |
Type: | XO (Standard) |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SG-9101CB 32.9970M-C20PHAAA5 oscillator is a commonly-used part of the oscillator family. Its application field and working principle are the focus of this article.
Application Fields
The SG-9101CB 32.9970M-C20PHAAA5 oscillator is mainly used in consumer and professional electronic products, such as digital camera, computer peripheral devices, multimedia products and automotive electronic related products. Its most practical application area is the built-in clock of communicationsystems, such as GSM and CDMA. The SG-9101CB 32.9970M-C20PHAAA5 oscillator is also used as a stabilizing circuit for high-speed digital signal processing, such as data transfer rate stabilizers, circuit clock stabilization and timing circuits.
Working Principle
Essentially, the SG-9101CB 32.9970M-C20PHAAA5 oscillator works by creating a oscillating voltage signal from a two-terminal VCO, an amplifying circuit and an output circuit. It uses electrical feedback to stabilize the frequency and maintain a constant oscillation. The positive feedback loop is formed by the voltage-controlled oscillator, the gain amplifier and the output circuit. The gain amplifier has two outputs, one is fed back to the VCO, while the other is fed to the output circuit. As the output voltage of the oscillator increases, the gain of the amplifying circuit decreases, causing the amplifier to turn off. The output frequency of the oscillator is determined by the inductance and capacitance of the components in the VCO.When the oscillator is turned on, a potential difference is created between the two terminals. This creates a tiny current across the terminals, which is amplified and output in the form of a voltage signal, which is inversely proportional to the capacitance of the components. The signal is then passed through a low-pass filter to remove the high-frequency noise and then fed back to the amplifier. The SG-9101CB 32.9970M-C20PHAAA5 oscillator can operate over a wide range of frequencies from 1Hz to 500MHz and is suitable for a wide range of applications including communications, instrumentations, control systems and test and measurement systems.
Conclusion
In conclusion, the SG-9101CB 32.9970M-C20PHAAA5 oscillator is a widely used component in many different electronic products. Its application fields and working principle are integral when considering the development of these products. It is important to understand the function of the SG-9101CB 32.9970M-C20PHAAA5 oscillator in order to ensure its correct application. With careful consideration and understanding, this oscillator can be successfully employed in a wide range of electronics.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...