SG-9101CB-D05PGDBB

Frequency Stability:	--
Current - Supply (Disable) (Max):	3.7mA
Height:	0.051" (1.30mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Spread Spectrum Bandwidth:	-0.50%, Down Spread
Operating Temperature:	-40°C ~ 85°C
Frequency Stability (Total):	--
Series:	SG-9101
Voltage - Supply:	1.62 V ~ 3.63 V
Output:	CMOS
Function:	Enable/Disable
Available Frequency Range:	670kHz ~ 170MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators

Programmable oscillators are electronic devices capable of generating waveforms with preset frequency, phase and other modulation parameters. They are widely used in many fields, such as industry, consumer electronics and aerospace applications. One of the most popular programmable oscillators is the SG-9101CB-D05PGDBB oscillator, which is used in a number of these applications. The SG-9101CB-D05PGDBB oscillator is a five-lead SMD device with an operating voltage range from 2.5 to 15 volts. It can generate highly accurate and stable signals in the range from 2MHz to 125MHz. This makes it perfectly suited for applications such as data transmission, radio frequency (RF) communication and broadcast. In addition, it has a low phase noise of -80dBc/Hz at 10KHz offset, making it very attractive for applications in RF receivers and transponders. The SG-9101CB-D05PGDBB is classified as a programmable oscillator. This means that the frequency and other parameters of the waveform can be electronically programmed by the user. This is useful when the waveform needs to be changed or adjusted according to the application. The device can be programmed using an interface such as SPI, I2C or USB, depending on the interface supported by the processor. The working principle of the SG-9101CB-D05PGDBB oscillator is based on feedback control. This type of control, also known as negative feedback control, involves sending a reference signal from the output of the device, through a feedback loop and back to the input of the device. This reference signal is compared with the input signal and any difference is corrected. This allows the device to generate a waveform with the desired frequency and other parameters. Overall, the SG-9101CB-D05PGDBB is an ideal choice for many applications, due to its programmability, low phase noise and wide operating voltage range. It is a great choice for applications in data transmission, radio and broadcast. Furthermore, it is easy to use and program, making it a favorite device for many engineers.

The specific data is subject to PDF, and the above content is for reference