SG-9101CE-D30PHABB

Frequency Stability:	--
Current - Supply (Disable) (Max):	3.7mA
Height:	0.047" (1.20mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Spread Spectrum Bandwidth:	-3.00%, Down Spread
Operating Temperature:	-40°C ~ 105°C
Frequency Stability (Total):	--
Series:	SG-9101
Voltage - Supply:	1.62 V ~ 3.63 V
Output:	CMOS
Function:	Enable/Disable
Available Frequency Range:	670kHz ~ 170MHz
Programmable Type:	Programmed by Digi-Key (Enter your frequency in Web Order Notes)
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators: SG-9101CE-D30PHABB

Programmable oscillators are electronic devices that produce precise periodic waves. They are used to create a stable reference frequency in various applications, such as radios and communication systems. In this regard, SG-9101CE-D30PHABB is a programmable oscillator developed by CTS Electronic Components.

Applications of SG-9101CE-D30PHABB

SG-9101CE-D30PHABB is suitable for a variety of applications which require reliable frequency control and pulse generation. Specifically, the oscillator can be used to transform input signals into standard-set clock signals for synchronization. This is increasingly important for precision control applications in semiconductor foundries, radio systems and other industries where precise timing is essential. Furthermore, SG-9101CE-D30PHABB has a low temperature coefficient, which provides superior frequency stability and accuracy across various temperatures.

SG-9101CE-D30PHABB Features

The SG-9101CE-D30PHABB features a wide operating voltage of 3 V to 5.5 V, as well as low power consumption down to 4 mW at maximum output frequency of 1000 MHz. It also has an adjustable output frequency of 16 kHz to 1000 MHz and a typical cycle-to-cycle jitter of 0.15 ps RMS at 200 MHz. Furthermore, this programmable oscillator features a wide range of safety features, including a power-on reset, an output enable pin and an auto-handshake capability. It also has a low-noise design that results in an extremely low phase noise floor.

Working Principle of SG-9101CE-D30PHABB

The SG-9101CE-D30PHABB programmable oscillator is based on temperature-compensated crystal oscillator (TCXO) technology. This technology allows for an accurate, stable and precise frequency output, with minimal timing jitter, over a wide input voltage range. The oscillator uses a quartz crystal as the resonator. It is then coupled with an electronic circuit which includes an amplifier, a clock generator, and a voltage-controlled oscillator (VCO).The oscillator also features a trimming circuit which allows the frequency to be tuned to meet specific requirements. The trimming circuit can be programmed using a digital interface, such as I2C or SPI, depending on the version of the oscillator. The trimming circuit works by adjusting the current running through the oscillator, which in turn adjusts the frequency of the output signal.

Conclusion

The SG-9101CE-D30PHABB is a programmable oscillator developed by CTS Electronic Components. It is suitable for a variety of applications, offering reliable frequency control and low power consumption. This oscillator features a wide operating voltage, adjustable output frequency, low cycle-to-cycle jitter, and a low-noise design. It is based on temperature-compensated crystal oscillator (TCXO) technology and is controlled using a trimming circuit which can be programmed using a digital interface.

The specific data is subject to PDF, and the above content is for reference