SG-9101CG 20.0000M-C20PHAAA5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits that produce a continuous output, such as a sine wave, for an input energy. SG-9101CG 20.0000M-C20PHAAA5 is one of these oscillators. The SG-9101CG 20.0000M-C20PHAAA5 is a non-overlapping multi-phase rectangular wave oscillator. This oscillator can be used to produce a wide variety of digital and analog signals.

The SG-9101CG 20.0000M-C20PHAAA5 oscillator is designed to operate at 20MHz and can operate from 0.5 to 2.7V. It has a low current consumption of 5mA and a low voltage drop of 1.4V. The operating temperature range is from -40°C to 85°C. The oscillator is also available in a range of package types including a small 28-lead LGA and QFN packages, a 20-pin DIL package and a 9-pin DIP package.

The SG-9101CG 20.0000M-C20PHAAA5 can be used in a variety of applications, from communications to consumer electronics. It can be used in the development of digital signal processors, remote sensing devices, ORPLs, CMOS simulation, motor control, PLLs, cellular telephones, cellular base stations and for test and measurement.

The working principle of the SG-9101CG 20.0000M-C20PHAAA5 oscillator is based on a feedback loop. The oscillator is composed of an input stage, a gain stage and an output stage. The input stage is a differential amplifier whose output is fed to a gain stage, which has a gain of 10. The output of the gain stage is then fed back to the input stage. The output is then filtered by a low-pass filter and fed to the output stage, which is composed of two transistors. The output stage supplies an amplified and filtered waveform to the output pin.

The SG-9101CG 20.0000M-C20PHAAA5 oscillator provides high accuracy and low power operation in a variety of applications. It is reliable and robust, and can be used in a variety of applications including communications, consumer electronics, test and measurement, motor control, CMOS simulation and ORPLs. The oscillator can be used in a wide range of temperatures, from -40°C to 85°C, and is available in a wide range of package types.

The specific data is subject to PDF, and the above content is for reference