
Allicdata Part #: | SG-9101CG-D20SGCBA-ND |
Manufacturer Part#: |
SG-9101CG-D20SGCBA |
Price: | $ 3.79 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Epson |
Short Description: | OSC PROG CMOS DWN SPRD STBY SMD |
More Detail: | XO (Standard) CMOS 670kHz ~ 170MHz Programmable Os... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 3.41460 |
10 +: | $ 3.26151 |
50 +: | $ 3.10993 |
100 +: | $ 2.88238 |
500 +: | $ 2.76860 |
1000 +: | $ 2.42726 |
2500 +: | $ 2.27556 |
Frequency Stability: | -- |
Current - Supply (Disable) (Max): | 3.7mA |
Height: | 0.032" (0.80mm) |
Size / Dimension: | 0.098" L x 0.079" W (2.50mm x 2.00mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | -- |
Spread Spectrum Bandwidth: | -2.00%, Down Spread |
Operating Temperature: | -40°C ~ 85°C |
Frequency Stability (Total): | -- |
Series: | SG-9101 |
Voltage - Supply: | 1.62 V ~ 3.63 V |
Output: | CMOS |
Function: | Standby |
Available Frequency Range: | 670kHz ~ 170MHz |
Programmable Type: | Programmed by Digi-Key (Enter your frequency in Web Order Notes) |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Programmable Oscillators
A programmable oscillator is an electronic component that is set to a specific frequency, typically within a few kHz of a desired target frequency. This can be done through a variety of means, such as using a circuit board or software, to configure the oscillator.
The SG-9101CG-D20SGCBA is a programmable oscillator module that supports a wide range of application fields. It has the ability to control a wide range of parameters in order to configure the oscillator for a wide range of uses.
Application Field
The SG-9101CG-D20SGCBA can be used in numerous electronic devices and applications. It can be used in medical and military equipment, remote controls, oscilloscope measurements, and radio frequency applications. It is also used as a frequency reference in most high-end audio equipment.
In addition, the SG-9101CG-D20SGCBA can be used in communication systems, such as Wi-Fi and Bluetooth. It has a wide range of operating frequencies and is compatible with a variety of protocols. This makes the SG-9101CG-D20SGCBA an ideal choice for a wide range of communication needs.
Working Principle
The working principle of the SG-9101CG-D20SGCBA is based on the principle of frequency control. This is accomplished by adjusting the voltage at the voltage control terminal. The voltage control terminal is used to adjust the frequency of the oscillator.
The SG-9101CG-D20SGCBA has built-in electronics that are used to accurately adjust the frequency. This includes a low-noise amplifier, a comparator, and an on-chip oscillator. The oscillator can be adjusted over a range of frequencies and this is done by changing the voltage at the voltage control terminal.
In addition, the SG-9101CG-D20SGCBA can be programmed to change frequencies with the use of a pulse control signal. This pulse control signal can be used to change the frequency of the oscillator and allow for rapid adjustment of the frequency.
The SG-9101CG-D20SGCBA is a reliable and accurate programmable oscillator that can be used in a variety of applications. It is versatile and can be used for a range of applications, from communication systems to audio equipment. Its ability to adjust frequencies rapidly makes it an ideal choice for many applications.
The specific data is subject to PDF, and the above content is for reference
OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...

OSC MEMSSSXO LVCMOS 1MHz ~ 141MHz Progra...
