SG-9101CG-D30PGBCB

Programmable Oscillators are electronic components that maintain a regular and repetitive form of energy in the form of an electrical signal, usually as an alternating current (AC) or a sine wave. The SG-9101CG-D30PGBCB is a type of programmable oscillator that is designed to be an autonomous circuit, generate, and control AC signals.

Application Field

Programmable Oscillators are widely used in many different industries and applications, from aerospace and defense, to consumer electronics and telecommunications. The SG-9101CG-D30PGBCB is specifically designed for use in High-Density Interconnect (HDI) applications, where it is used to control the clock frequency needed to control complex signal timing. In addition, they are used in telecommunications, medical equipment, embedded systems, and other signal processing applications.

Working Principle

The SG-9101CG-D30PGBCB programmable oscillator works by generating a signal that consists of a predetermined frequency and cycle, which can be controlled and adjusted if needed. The frequency of the signal generated is determined by the clock speed, or frequency of the output signal. The primary components of the SG-9101CG-D30PGBCB circuit include a crystal oscillator, a frequency synthesizer and a phase-locked loop (PLL). The crystal oscillator generates a square wave signal and is typically used as the reference clock for the oscillator. The frequency synthesizer then controls the frequency of the signal by adjusting the duty cycle of the signal. Finally, the PLL is used to ensure that the clock signal remains in sync with the desired frequency.

The SG-9101CG-D30PGBCB employs an adjustment range of over 600:1 and is able to provide a very stable output signal that remains accurate even over wide variations in temperature and load. The design also features digital logic features, low current consumption, and is able to operate in a wide temperature range. In addition, the device offers a wide range of frequencies, including low-speed ranging from 375 kHz to 2.3 GHz, mid-speed from 250 kHz to 2.7 GHz, and high-speed from 100 kHz to 3.2 GHz.

Conclusion

In conclusion, the SG-9101CG-D30PGBCB is a type of programmable oscillator that is designed for use in HDI applications such as telecommunications, medical equipment, embedded systems, and other signal processing applications. It is able to generate a signal with a predetermined frequency and cycle through the use of a crystal oscillator, a frequency synthesizer, and a PLL circuit. In addition, the SG-9101CG-D30PGBCB offers a wide range of frequencies, a wide adjustment range, and low current consumption.