SH150S-0.54-173

DC Resistance (DCR):	600 mOhm
Height - Seated (Max):	0.337" (8.55mm)
Size / Dimension:	0.559" L x 0.551" W (14.20mm x 14.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	10kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	SH150
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	540mA
Tolerance:	±20%
Inductance:	173µH
Material - Core:	Iron Powder
Type:	Toroidal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed inductors are electronic components used for energy storage, electrical current control, filtering, isolation, and signal transformation. These inductors store energy within their magnetic fields. They are usually cylindrically shaped components made of copper wire, and embedded with magnetic materials. SH150S-0.54-173 is a fixed inductor that is commonly used for different applications.

Application Field:

SH150S-0.54-173 has a wide range of applications in various kinds of electronic devices. It is regularly used in all water-cooled 3 phase motors, refrigeration equipment, generators, speed controlled devices, as well as general electronic equipment. Apart from these applications, it is also used in switch mode power supplies, vibration motors, compressor motors, and many other devices. The SH150S-0.54-173 is often equipped with a protective layer of insulation over the winding that prevents accidental contact with the inductor’s terminals. This makes it suitable to be used in applications that are subject to dust, dirt, moisture and other harsh environmental conditions.

Working Principle:

When electrical current passes through a fixed inductor, it produces an electromagnetic field that stores energy. This energy is then released at a later stage when current stops flowing through the inductor. The operation of the SH150S-0.54-173 is governed by Faraday’s Law, which states that the induced electric field (E) is proportional to the rate of change of the magnetic field (B). This means that when the rate of change of magnetic flux changes in the inductor, an electric current is induced in the winding of the inductor. When alternating current is applied to the inductor, the current flows in a sinusoidal fashion. For every sinusoid, the amount of current flowing is determined by the value of the inductor. This value is referred to as the inductor’s “inductance”. The higher the inductance of the inductor, the higher the current flowing through the inductor. The inductance of the SH150S-0.54-173 is determined by its geometry, the material used in its construction, and the number of windings around the core. This helps to provide more precise current and voltage control for the applications in which it is used.

Conclusion:

SH150S-0.54-173 is a fixed inductor that has a wide range of applications in many different kinds of electronic devices. It operates on the principle of Faraday’s Law and provides precise current and voltage control. Its compact design, protective layer of insulation, and durability make it a reliable choice for usage in hostile environments.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description