SIT1602AI-12-XXE-33.333330G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electrical circuits that generate a repetitive form of electrical signal, generally a sine wave or a square wave. Oscillators are used in many areas, such as timers, cars, computers, radio transmitters, and so on. Oscillators are used to generate a reference signal to provide timing synchronization in computers, phone networks, and automotive electronics. They are also used in communication systems to recover signals from noise, in radar systems for target detection, and for providing reference tones in digital signal scrambling systems.

The SIT1602AI-12-XXE-33.333330G oscillator is a low jitter oscillator designed for high performance applications. It can be used in a wide range of applications including frequency synthesis, clock distribution, signal processing, modems, timing systems, and wireless communications. The SIT1602AI-12-XXE-33.333330G oscillator has a frequency range of 6.25 MHz to 200 MHz, and can be adjusted in steps of 0.1ppm. It has a stability of 0.1ppm at 25C, and a low phase noise of -160dBc/Hz.

The SIT1602AI-12-XXE-33.333330G oscillator is a quartz oscillator, and its working principle is based on the piezoelectric effect. When a quartz crystal is placed between two electrical conductors, it produces an electrical voltage when an alternating current (AC) is applied to it. This is known as the piezoelectric effect. The voltage induces a strain in the crystal, and the crystal returns the energy in the form of a mechanical vibration. This mechanical vibration is then converted back to an electrical signal, with a frequency that is determined by the particular crystal. By cycling the current through the crystal and matching the resonance frequency, an oscillation in the voltage can be achieved.

The output of this oscillator can be used for wide array of applications. It can be used for frequency synthesis in radio receivers and transmitters. It is also used in many other electronic devices such as in watch clocks, car accessories, cell phones, computers, and so on. It can be used for providing a clock signal for microprocessors or for clocking data transmission in serial interfaces. It is also used for the generation of reference signals for digital signal processing applications like FSK/ASK modulation, signal scrambling, and equalization.

The SIT1602AI-12-XXE-33.333330G oscillator has a very low phase noise, which provides superior jitter performance compared to other oscillators in the same frequency range. Its wide frequency range, low jitter performance, and high stability make it an ideal choice for many applications in the areas of frequency synthesis, clock distribution, signal processing, and wireless communications.

The specific data is subject to PDF, and the above content is for reference