SIT1602AIB3-XXE

Programmable oscillators are special type of oscillators used to generate signal with specific characteristics. The SIT1602AIB3-XXE PLL oscillators are unique in that they are able to generate signals with a wide variety of characteristics. The frequency range of the SIT1602AIB3-XXE oscillators ranges from approximately 10MHz to 1600MHz and can be used for a variety of applications such as frequency synthesis, time base generation, and frequency division. This wide frequency range is made possible by utilizing a low-noise phase-locked loop (PLL).

The working principle of the SIT1602AIB3-XXE is similar to other PLL oscillators. The oscillator is composed of a voltage-controlled oscillator (VCO) and a highly-sensitive, low-noise charge pump counter (CPC). The CPC is linked to the VCO and is responsible for providing the control signals to the VCO. The CPC is also equipped with a counter that is used to monitor the accuracy of the PLL. The CPC then compares the actual frequency of the VCO against the desired frequency set with a control voltage. If the frequency of the VCO is too high, the CPC will reduce the control voltage, causing the VCO to lower its frequency.

The SIT1602AIB3-XXE is designed for use in high-speed communications, medical electronics, aerospace and defense, telecom, automotive and other embedded applications. It is ideal for applications that require wide frequency range, low power consumption, high accuracy and minimal interference. The oscillator also provides robust noise immunity, low jitter, and fast frequency response. Its low power consumption makes it well suited for battery powered applications. Moreover, its high accuracy and low jitter makes it suitable for synchronization applications.

The SIT1602AIB3-XXE offers flexible design options with its low-noise PLL, adjustable output frequency and slew rate, wide frequency range, and low jitter. It is also an ideal solution for applications that require multiple frequencies. The oscillator includes an on-chip voltage controlled oscillator (VCO) and a charge pump counter (CPC). The CPC is used to provide the control signals to the VCO and to monitor its accuracy. The oscillator can be programmed by adjusting its output frequency, slew rate, and input voltage.

In conclusion, the SIT1602AIB3-XXE is a highly-sensitive, low-noise PLL oscillator designed for applications where wide frequency range, low power consumption and high accuracy is required. Its flexible design allows for multiple frequencies, low jitter and robust noise immunity. The oscillator is suitable for a wide range of applications including high-speed communications, medical electronics, ts aerospace and defense, telecom, automotive and other embedded system.