SIT1602BC-13-25S-19.200000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic circuit that produces a steady repeating signal, usually unsymmetrically divided (ie, not equally divided by one-half or one-third its period). Oscillator circuits are used in a variety of applications such as clocks, timers, FM radio transmitters and receivers, tuning circuits, and audio amplifiers. Oscillators are also used in digital systems for random number generation and clock generator circuits.

Among the most common types of oscillators, is the SIT1602BC-13-25S-19.200000D oscillator, which is a highly precise quartz crystal oscillator for 13.25MHz to 19.2MHz frequency range. It has a maximum load capacitance of 30pF, and is often used in high speed digital applications for timing and control of synchronization.

Working Principle of SIT1602BC-13-25S-19.200000D Oscillator

The working principle of the SIT1602BC-13-25S-19.200000D oscillator is based on the positive feedback loop. The feedback loop is composed of a quartz crystal resonator, an amplifier, and two capacitors. The oscillator produces an output signal which is fed back to the input side of the amplifier, and the resulting amplified signal is then fed back to the oscillator. This positive feedback causes the circuit to oscillate at a frequency determined by the quartz crystal.

In the oscillator, the quartz crystal functions as a high-Q filter and sets the oscillation frequency of the circuit. As the circuit oscillates, the quartz crystal acts as a frequency selector, allowing only signals with a frequency equal to that of the quartz crystal to pass through. These frequencies are then amplified by the amplifier. The two capacitors act as coupling capacitors, allowing the applied signal to pass through the quartz crystal and the amplifier without affecting the oscillation frequency.

Applications of SIT1602BC-13-25S-19.200000D Oscillator

The SIT1602BC-13-25S-19.200000D oscillator is widely used in higher frequency applications, such as communications, data networks, and IT products. It is often used in telecommunications systems, such as for clocking applications or timing signal recovery. In addition, it is commonly used in digital systems, such as for timing and control synchronization of data storage units, and also for error detection and correction.

In general, this oscillator is used for timing and synchronization of data transmission in high speed data communication, such as in digital television and in the broadcast of radio and television signals. Additionally, it can be used in various industrial systems, such as for controlling the speed of rotating machinery and controlling the sound pressure of air-conditioning systems.

The SIT1602BC-13-25S-19.200000D oscillator is also used in many medical systems, including biomedical monitoring and testing instruments. It is suitable for a wide range of medical applications, such as cardiovascular monitoring, electrocardiogram (ECG) recording, digital imaging systems, and patient monitoring.

In conclusion, the SIT1602BC-13-25S-19.200000D oscillator is a highly precise quartz crystal oscillator for 13.25Mhz to 19.2Mhz frequency range, and is used in a variety of applications, such as telecommunications systems, digital systems, industrial systems, and medical systems. It offers excellent stability, accuracy, and low power consumption, and is highly suited for higher frequency applications such as data networks and IT products.

The specific data is subject to PDF, and the above content is for reference