SIT1602BC-22-18S-66.666000G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators, such as SIT1602BC-22-18S-66.666000G, are used to generate a repetitive waveform, namely a periodic signal. These waveforms can be a sine wave, a square wave, a triangular wave, a sawtooth wave, or a combination of these waveforms.

The purpose of an oscillator is to convert a dc voltage to an ac voltage. An oscillator is usually composed of two components, an amplifier and a frequency-determining device. The oscillator works by passing an alternating current through the frequency-determining device, which is typically a resistor-capacitor (RC) network. The RC network acts as a low-pass filter, and its output is connected to the input of the amplifier. The amplifier then amplifies the alternating current, and applies the amplified signal back to the input of the RC network. The frequency of the oscillation is determined by the values of the components in the RC network.

SIT1602BC-22-18S-66.666000G is a voltage-controlled oscillator (VCO). It has a frequency range of 66.666MHZ to 2.4GHz, a supply voltage of 5V or 3.3V, and a control voltage of 0V to 4V. It has typical phase noise performance of -140dBc/Hz at 1MHz offset from the carrier. It has a wide range of applications including radio frequency (RF) transmitters and receivers, mobile phones, global positioning systems (GPS), satellite communications, and medical imaging.

SIT1602BC-22-18S-66.666000G can be used in radar systems, where the oscillator needs to generate signals with a frequency that varies according to the distance the target is from the radar. Another application is in wireless networks, where the oscillator is used to generate a reference signal for frequency hopping. In medical imaging, the oscillator is used to generate frequency modulated continuous wave (FMCW) signals, which are used to generate images of structures within the body.

In summary, SIT1602BC-22-18S-66.666000G is a voltage-controlled oscillator that is used in many applications. It has a wide frequency range, and can be used to generate signals for ranging, wireless networks, and medical imaging. Its stable frequency and low-phase noise performance make it an ideal choice for these applications.

The specific data is subject to PDF, and the above content is for reference