SIT1602BC-22-30N-74.176000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a type of electronic component that creates periodic electrical signals without an external source of power. They are used in applications such as timers, frequency counters, signal generators, electronic instruments, and computer peripherals. The SIT1602BC-22-30N-74.176000E is an oscillator specifically designed for use in oscillator circuits. This article provides an overview of the SIT1602BC-22-30N-74.176000E\'s application field and working principle.

Application field

The SIT1602BC-22-30N-74.176000E is designed to provide a highly accurate and stable signal source for frequency-based applications. It is commonly used in a variety of oscillator circuits and as an oscillator source for digital logic gates, radios, TV sets, personal computers, and other electronic equipment. It is also used in a wide range of digital signal processing (DSP) applications, frequency modulation (FM) measurement, frequency counter, phase locked loop (PLL) applications, and image processing.

The SIT1602BC-22-30N-74.176000E oscillator is available in several frequencies and is suitable for use with a variety of logic families, including CMOS, TTL, and EDLF. It is capable of operating over a wide range of temperatures and is able to handle high speeds up to 40MHz.

Working principle

The SIT1602BC-22-30N-74.176000E is a type of voltage controlled oscillator (VCO) that can be tuned over a specific range of frequencies. The VCOs work by converting an input voltage to an oscillating output signal with a frequency that is proportional to the input voltage. The input voltage is supplied to the oscillator circuit through two paths: one path containing a series of capacitors, and the other containing a series of resistors. These paths create two opposing voltage, which acts as the input signal to the VCO.

The VCO then operates by taking the input voltage and amplifying it, creating an oscillating output signal. This signal is then filtered to remove any unwanted harmonics, before being outputted from the VCO. The frequency of the output waveform is dependent on the size of the capacitors and resistors, and the applied voltage amplitude. By adjusting the values of these components, the frequency of the output waveform can be finely tuned.

The SIT1602BC-22-30N-74.176000E oscillator operates at a frequency range of 74.176MHz to 74.176MHz with a frequency stability of 0.5%. It provides an output voltage of 4.5V and requires a supply voltage of 5V. Additionally, it has an output current of 20mA and a power dissipation of 200mW.

Conclusion

The SIT1602BC-22-30N-74.176000E is a specialized oscillator designed for use in oscillator circuit applications. It provides a reliable and stable signal source with a wide range of frequencies and is suitable for use with a variety of logic families. The oscillator has an output voltage of 4.5V and requires a supply voltage of 5V.

The VCO is designed to provide a highly accurate and stable signal source for frequency-based applications, and is suitable for use in a wide range of oscillator circuits and digital signal processing applications. By adjusting the values of the capacitors and resistors, it is possible to finely tune the frequency of the output waveform.

The specific data is subject to PDF, and the above content is for reference