SIT1602BC-23-33S-48.000000E

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	4.3µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-20°C ~ 70°C
Series:	SiT1602B
Voltage - Supply:	3.3V
Output:	LVCMOS
Function:	Standby (Power Down)
Frequency:	48MHz
Type:	MEMS (Silicon)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: SIT1602BC-23-33S-48.000000E

Oscillators are electronic frequency generators that create a continuous sine wave output. They can be used in a variety of applications such as timing, frequency control, clock synchronization, and signal amplification. SIT1602BC-23-33S-48.000000E is a voltage-controlled oscillator (VCO) product from Skyworks Solutions and is used mainly in radio frequency (RF) applications.

Features and Specifications

The SIT1602BC-23-33S-48.000000E has superior performance characteristics and offers a good combination of features as well as wide band-width operation. It offers a frequency range of 825 to 960MHz, a center frequency of 895MHz and an output power of 20 dBm. It has an extended temperature range of -40°C to 85°C and its supply current is a low 11 mA. The device has a wide input voltage range of 6V to 15V with a power scan voltage of 3V. It has a phase noise of -100 dBc/Hz @100kHz offset and is +10 dBm, 4dBm, and 9dBm stated as external power supply limits, above which a protection circuit takes over.

Applications

The SIT1602BC-23-33S-48.000000E is mainly used in wireless applications such as Global System for Mobile Communications (GSM), Code Division Multiple Access (CDMA) and both Analog and Digital Cellular (Cellular) communications. It can also be used in wireless Local Area Network (LAN) applications, especially with the 802.11b/g standards, as it helps in supporting the receiver functions in these systems. This oscillator can also be used in wireless cable (IEEE 802.11a/b/g), microwave links, trunk radios and satellite transceivers.

Working Principle

The SIT1602BC-23-33S-48.000000E VCO operates on the principle of a feedback loop that provides stability and frequency control. This loop generates a voltage-controlled oscillation that allows for frequency-dependent voltages that control the stability and frequency of oscillation. The oscillations generated by the loop are an amplified reproductions of the output signal. It is also a nonlinear function that evolves over time and is driven by an external voltage which controls the frequency and amplitude of the output waveforms. The VCO has particular characteristics like positive-negative voltage swing, and this is the key factor controlling the gain and stability of the circuit. The control voltage can also be used to provide more linearity and stability in the oscillators, making them ideal for use in wireless communications.

Conclusion

The SIT1602BC-23-33S-48.000000E oscillator is often used in radio frequency (RF) applications due to its range of features and its superior performance characteristics. It can be applied in different wireless applications like GSM, CDMA and Cellular communications, as well as in wireless LANs, microwave links, trunk radios and satellite transceivers. The VCO operates on a feedback loop that provides stability and frequency control, using an external voltage to control the gain and stability of the circuit. Its wide input voltage range and its low power consumption make it perfect for such applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description