SIT1602BC-32-30E-40.000000X

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	4.2mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-20°C ~ 70°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	3V
Output:	HCMOS, LVCMOS
Function:	Enable/Disable
Frequency:	40MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are devices used to introduce and sustain a regularly repeating waveform in an electrical circuit. They are useful in a variety of applications such as telecommunications, audio processing, signal processing, and even medical imaging. The primary purpose of oscillators is to generate waveforms of a specified frequency and amplitude.SIT1602BC-32-30E-40.000000X is an oscillator that can be used in these applications. It has a wide frequency range of 32 kHz to 300 kHz and a wide power supply range of 9 to 18 Volts. It has a fast rise and fall time and is able to provide a clean and accurate signal.

Applications

SIT1602BC-32-30E-40.000000X can be used in a variety of applications. It has been used in the telecommunications industry for signal conditioning, and in audio processing for dynamic range control. It is also used in signal processing applications such as frequency modulated wave generation and phase shift keying. It is suitable for medical imaging applications such as MRI, CT and PET scans as its frequency range and high accuracy makes it suitable for these demanding applications.

Working Principle

SIT1602BC-32-30E-40.000000X works on the principle of feedback. The oscillator is composed of an amplification stage and a feedback loop. The amplification stage amplifies the input signal and the output signal is then fed back into the input of the amplifier in a closed loop. This feedback loop causes the signal to oscillate at a specific frequency as determined by the components of the circuit and the frequency of the input signal.The frequency can be adjusted by changing the gain of the amplifier, the frequency of the feedback loop, or the capacitance of the capacitors in the circuit. The amplitude of the signal can be adjusted by changing the bias voltage of the amplifier, the resistance of the feedback circuit, or the amount of feedback.

Conclusion

SIT1602BC-32-30E-40.000000X is an oscillator that is used in a variety of applications such as telecommunications, audio processing, signal processing, and medical imaging. It works on the principle of feedback, and the frequency and amplitude of the signal can be adjusted by changing the components of the circuit. It is a reliable and accurate oscillator that is suitable for many demanding applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description