SIT1602BC-32-30N-48.000000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used in a variety of applications, from electronics to telecommunications. The SIT1602BC-32-30N-48.000000T is an example of an oscillator designed for use in consumer electronics, telecommunications and industrial applications. This article will discuss the features and working principle of the SIT1602BC-32-30N-48.000000T oscillator.

The SIT1602BC-32-30N-48.000000T is an integrated circuit (IC) oscillator, featuring a low power, low noise, and ultra-stable output over a large temperature range. It is typically used in oscillators, voltage controlled oscillators (VCOs), and frequency multipliers. It combines a wide oscillation frequency range with low power consumption and great temperature sensitivity to provide a reliable and accurate frequency output. The IC is also well-suited for timing and frequency control applications.

The output frequency of the oscillator can be tuned by adjusting the input frequency. This is done by changing the R parameter, which sets the nominal range of the input frequency. The oscillator also features in-circuit trimming using an additional external resistor to provide fine adjustment of the device\'s frequency output. This allows users to fine-tune the frequency to their required specifications.

In terms of performance parameters, the SIT1602BC-32-30N-48.000000T offers an impressive range of frequency outputs. The range of the oscillator is from 0.045MHz to 30MHz, with an adjustable output power of up to +2Vpp. It also has an input current of 1mA maximum and an output current of up to 30mA peak signal current.

The oscillator also features a wide temperature range of -40 to +85 degrees Celsius making it suitable for a variety of industrial applications. It also offers excellent frequency stability over temperature, with a variation of less than 0.5% per degree Celsius. It also has a low power consumption of 25mW and a low noise level of -96dBc/Hz.

The SIT1602BC-32-30N-48.000000T oscillator also offers excellent phase noise behaviour. It has an input phase noise of -125dBc/Hz, which is equivalent to a signal to noise ratio (SNR) of 96dB. Additionally, it has a total output harmonic suppression of up to -90dBc/Hz.

The working principle of the SIT1602BC-32-30N-48.000000T is relatively simple. It uses an amplifier to generate an oscillating current from the input voltage. This current is then compared with the reference input voltage, and if the frequency or amplitude of the signal deviates from the reference value, the feedback loop is triggered. This feedback loop reaction corrects the deviation, thus generating a stable and precise output frequency.

In conclusion, the SIT1602BC-32-30N-48.000000T is an integrated circuit oscillator that is suitable for a variety of applications. It combines a wide oscillation frequency range, low power consumption and excellent phase noise behaviour with a wide temperature range and great frequency stability. This makes it a great option for industrial applications in need of reliable and accurate frequency control.

The specific data is subject to PDF, and the above content is for reference