Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic device or circuit used to generate a periodic, oscillating electrical signal. It is commonly used to generate a wide variety of signals from very low frequencies in tens of millihertz low were up to hundreds of megahertz.SIT1602BC-32-30S-40.000000T is an oscillator which utilizes phase lock loops (PLLs) to control the frequency by multiplying and dividing a reference frequency that is applied to a voltage-controlled oscillator (VCO). It can generate frequency which range from 30-200 MHz. The most common application related to this oscillator is in cellular phone base stations. This type of oscillator is used as a way to achieve the best synchronization signal in order to attain the best possible performance.

Working Principle

SIT1602BC-32-30S-40.000000T oscillator works by utilizing a phase lock loop (PLL) to generate a frequency which is determined by multiplying and dividing a reference frequency that is applied to a voltage controlled oscillator (VCO).

The oscillator has two input signals: a reference frequency signal and a voltage control signal. The reference frequency signal is used to determine the output frequency, and then the voltage control signal is used to adjust the output frequency, thus allowing the oscillator to achieve a desired output frequency.The oscillator also contains a phase detector, an amplifier, and a filter. The phase detector is used to compare the output signal of the oscillator with the reference frequency signal, and it will adjust the voltage control signal accordingly. The filter then removes any unwanted noise that is introduced by the phase detector. The amplifier then amplifies the filtered signal, and then sends it to the VCO to create an output frequency.

Application Fields

SIT1602BC-32-30S-40.000000T oscillator is widely used in many applications including cellular phone base stations, satellite communications systems, radio navigation systems, satellite and digital broadcasting, as well as portable telecommunication systems.In cellular phone base stations, this type of oscillator is used as a way to achieve the best synchronization signal in order to attain the best possible performing cell base stations. Usually, this oscillator provides an output frequency which matches the required frequency for the base station. In addition to its usage in cellular networks, this oscillator can also be used in satellite navigation systems where it is used to generate a phase locked signal for high accuracy navigational systems.Finally, this oscillator can also be used in digital broadcasting and satellite communications systems, where it is used to produce a stable transmission signal in order for successful communication.

Conclusion

SIT1602BC-32-30S-40.000000T oscillator is a type of oscillator which is used in a wide range of applications including cellular phone base stations, satellite communications systems, radio navigation systems, satellite and digital broadcasting, as well as portable telecommunication systems. This type of oscillator works by utilizing a phase lock loop (PLL) to generate a frequency which is determined by multiplying and dividing a reference frequency that is applied to a voltage controlled oscillator (VCO). The oscillator also has two input signals: a reference frequency signal and a voltage control signal. The reference frequency signal is used to determine the output frequency and then the voltage control signal is used to adjust the output frequency, thus allowing the oscillator to achieve a desired output frequency.

The specific data is subject to PDF, and the above content is for reference