SIT1602BC-82-18S-25.000000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits with a signal output that oscillates or repeats itself over time in a repeating fashion. Oscillators are typically used to generate repetitive signals which control the timing of a wide variety of circuits, particularly in digital circuitry. SIT1602BC-82-18S-25.000000Y is a type of oscillator.

The SIT1602BC-82-18S-25.000000Y is a programmable sinewave oscillator, which helps to minimize programming time. It works as a voltage-controlled oscillator (VCO), and is capable of producing sinewave output signals of frequencies ranging from 0.2 Hz to 25 MHz. It is powered from a single 3V battery, but can output up to a maximum of 24V. The SIT1602BC-82-18S-25.000000Y can also be programmed to provide variable duty cycles, allowing it to produce waveforms other than sinewaves.

The SIT1602BC-82-18S-25.000000Y oscillator is typically used for many different applications. It can be used to generate clock signals for digital logic circuits, as well as modulating radio frequency signals for transmitting and receiving radio signals. It is also used in frequency control circuits, particularly for generating precise timing signals. Further applications include the use of the oscillator for frequency division, enabling it to generate a wide variety of output frequencies in a very short amount of time.

The working principle of the SIT1602BC-82-18S-25.000000Y is based on the same principles that allow any type of oscillator to generate an output signal. It should be noted that the output signal produced by this oscillator is not necessarily a sinewave, as this depends on how the oscillator is programmed. The oscillator works by using a combination of positive and negative feedback. A voltage is applied to the oscillator, which causes the frequency of the output signal to increase and decrease. This frequency is controlled by adjusting the applied voltage, which produces a waveform at the oscillator’s output.

The SIT1602BC-82-18S-25.000000Y oscillator is a convenient and cost-effective solution for a variety of applications, enabling the user to conveniently control the frequency of an output signal. It is also capable of providing precise timing signals, making it an ideal choice for many different applications.

The specific data is subject to PDF, and the above content is for reference