SIT1602BC-83-28N-19.200000Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are circuit elements that generate waves of varying frequency to produce alternating currents. Application fields of oscillators are extensive, and hence, there exist a plethora of oscillator designs, with SIT1602BC-83-28N-19.200000Y being just one of them. Although their applications differ, some of the principles involved in their operation are similar.

The SIT1602BC-83-28N-19.200000Y oscillator is a voltage-controlled oscillator (VCO), used in microprocessor-based systems and applications. Its primary purpose is to generate a square wave at a predetermined frequency with the help of timing components, and use this to control the microprocessors. In particular, this type of VCO is designed to provide an optimized frequency response with excellent stability over a wide range of environmental conditions.

VCOs are voltage-controlled current sources with feedback that adjusts the current, driving the active device until the oscillation frequency is reached. The active device used in SIT1602BC-83-28N-19.200000Y is a monolithic voltage-controlled conductor, often referred to as a MOSFET, which is accurate to within 0.22% of the set frequency over the entire supply voltage range.

The VCO consists of many components that work in tandem to generate an oscillating current. The active element of the VCO is the MOSFET, and the frequency is controlled by an external voltage. The MOSFET is connected to an RC or LC network to ensure that the frequency is controlled properly. Once the frequency is set, the MOSFET pumps charge into the capacitor of the LC network to generate a sawtooth waveform, which is caused by the change in capacitance as the charge is pumped into the capacitor.

The output of the VCO is then amplified and filtered to generate the sawtooth waveform, and once the predetermined frequency is reached, the output is squared off into a square wave. Finally, a phase-locked loop is used to maintain the frequency, ensuring that the frequency does not drift over time. The application field of SIT1602BC-83-28N-19.200000Y is therefore ideal for use in microprocessor-controlled applications that require a stable and accurate frequency source.

To summarise, the SIT1602BC-83-28N-19.200000Y oscillator is a voltage-controlled oscillator primarily used in microprocessor-based applications. Its active element is the MOSFET, and it is connected to an RC or LC network. The frequency is adjusted by an external voltage, which is then passed through an amplifier and filter to generate a sawtooth waveform. Finally, a phase-locked loop is used to maintain the frequency. Thus, the SIT1602BC-83-28N-19.200000Y is a suitable oscillator for microprocessor controlled applications that require a stable and accurate frequency source.

The specific data is subject to PDF, and the above content is for reference