SIT1602BI-11-18E-19.200000E

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	4mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.1mA
Operating Temperature:	-40°C ~ 85°C
Series:	SiT1602B
Voltage - Supply:	1.8V
Output:	HCMOS, LVCMOS
Function:	Enable/Disable
Frequency:	19.2MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electrical and electronic components used to generate a continuous electrical signal. This signal can be a sine wave, square wave, sawtooth wave, or a combination of different waveforms, depending on the particular oscillator. One type of oscillator, referred to as a SIT1602BI-11-18E-19.200000E oscillator, is commonly used in the aerospace, defense, and communications industries. This article will discuss the application field and working principle of a SIT1602BI-11-18E-19.200000E oscillator.The SIT1602BI-11-18E-19.200000E oscillator is a surface-mountable device designed for high frequency applications, up to 20GHz. This oscillator is typically used in range and tilt applications. It is capable of generating highly stable output signals with the ability to oscillate at an accuracy of 1GHz. It features low phase noise, high stability, and wide frequency range. The SIT1602BI-11-18E-19.200000E oscillator works using a combination of a resonator, an amplifier, and an oscillator circuit. The oscillator circuit contains an amplifier and two transistors. The resonator is a quartz crystal which is connected to the transistor base to provide a high frequency signal. The amplifier is used to amplify the resonator signal and the transistor is used to amplify the output signal. The output of the oscillator is typically connected to a controller or amplifier, and is used to generate a control signal. This control signal is then used to control a device, such as a servo motor. The advantage of using an oscillator instead of an analog signal is that the oscillator signal is not affected by noise or other signal disturbances. There are various advantages associated with using the SIT1602BI-11-18E-19.200000E oscillator. One advantage is that the frequency range of this oscillator is very wide, with a frequency range of up to 20GHz. Additionally, since the oscillator is surface mounted, installation costs are significantly lower than with traditional oscillators. The oscillator also has an extremely low phase noise, allowing for very high accuracy control signals. In summary, the SIT1602BI-11-18E-19.200000E oscillator is a surface-mountable device designed for high frequency applications, up to 20GHz. This oscillator is commonly used in range and tilt application, and it can generate highly stable output signals that are highly resistant to noise and signal interference. The oscillator features low phase noise, high stability, and wide frequency range. Additionally, installation is low cost due to its surface-mountable design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description