SIT1602BI-11-25E-25.000000E

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	4.2mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.2mA
Operating Temperature:	-40°C ~ 85°C
Series:	SiT1602B
Voltage - Supply:	2.5V
Output:	HCMOS, LVCMOS
Function:	Enable/Disable
Frequency:	25MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SIT1602BI-11-25E-25.000000E oscillator is an integrated circuit component which produces a square wave oscillating signal. It is classified as an oscillator, which is a type of electrical circuit that produces repetitive, periodic waveforms. Oscillators are used in a variety of electronic applications, from simple radios to complex medical systems.

Application Field

The SIT1602BI-11-25E-25.000000E oscillator is typically used in frequency control applications such as frequency synthesizers, microprocessors and microcontrollers, as well as in computer systems that require precise time references. It is also used in telecommunications systems, including mobile phones, and in some automotive applications.The SIT1602BI-11-25E-25.000000E oscillator is suitable for high volume applications as it has a smaller size, lower power consumption and greater precision than other oscillators. It is also capable of producing a wide range of output frequencies, making it suitable for use in complex systems.

Working Principle

The SIT1602BI-11-25E-25.000000E oscillator works by producing an electrical signal at a very high frequency, known as the resonant frequency. This signal is then divided by an external circuit such as a digital counter, producing an output signal at a lower frequency. This output signal is then used as a reference for timing or other operations.The oscillator works by using two transistors, each connected to a resistor and capacitor in a linear feedback configuration. When the power supply is connected, a current flows through the two transistors, charging the capacitor until it reaches a point of equilibrium, at which point it starts to oscillate at its resonant frequency. This frequency is determined by the value of the capacitor and the value of the resistor.The oscillator is also capable of producing a wide range of output frequencies by adjusting its output frequency divider. This is done by changing the value of the capacitor or resistor, or by adding other components to the linear feedback circuit.

Conclusion

The SIT1602BI-11-25E-25.000000E oscillator is a highly versatile component which is used in many applications. Its small size, low power consumption, and wide range of output frequencies make it suitable for use in a variety of electronic applications. Its working principle involves using two transistors, connected to a resistor and capacitor in a linear feedback configuration, to produce an output signal at a frequency determined by the values of the resistor and capacitor. This output signal can then be divided by an external circuit to produce an output frequency suitable for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description