SIT1602BI-11-25E-4.000000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic device which produces a periodic and continuous wave signal. The term "oscillator" is used to describe a wide variety of electronic circuits which could be used to generate a variety of signals with different frequencies and shapes. The SIT1602BI-11-25E-4.000000E is an example of an oscillator.

Application Field

The SIT1602BI-11-25E-4.000000E is typically used in applications such as timed devices, radio frequencies, sound, and timing control. It is used to provide a consistent and reliable signal for these devices and is often used in communications applications where a steady and controllable signal is needed. Its small size and low power consumption make it a good choice for applications such as time-keeping, radio-controlled (RC) models, and electronics toys.

Working Principle

The SIT1602BI-11-25E-4.000000E is an oscillator that operates by using an internal oscillator circuit. This circuit consists of a voltage controlled oscillator (VCO), which is connected to the ground and to the input of the amplifier. The output of the amplifier is connected to the output node of the oscillator circuit. The oscillator is made up of a quiescent current source and multiple capacitors connected to form a series resonance circuit. The quiescent current source provides a fixed voltage while the capacitors each represent different frequencies and form the frequency range of the oscillator. The transistor is used to control this current source and to adjust the output frequency.

The VCO is used to control the frequency of the oscillator. The frequency is determined by the charge and discharge of the capacitor connected to the VCO. The output frequency is determined by the frequency of the oscillator, the voltage applied to the VCO, and the bias current of the transistor. When the voltage applied to the VCO is increased, the frequency of the oscillator increases.

The SIT1602BI-11-25E-4.000000E is designed to be very stable and highly reliable, and can be used for a variety of applications. It can be used for timing, frequency control, and signal generation applications. It is often used in communications applications where a steady and controllable signal is needed. The SIT1602BI-11-25E-4.000000E can also be used in embedded and consumer applications, as its low power requirements and small size make it an ideal choice for such applications.

The specific data is subject to PDF, and the above content is for reference