SIT1602BI-11-33N-14.000000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic devices that oscillate - that is, they operate between two voltage levels in a repeating sequence. SIT1602BI-11-33N-14.000000E is an example of an oscillator, and is used in a variety of different applications. This article will explore the application field and working principle of this particular oscillator.

Application Field

SIT1602BI-11-33N-14.000000E is commonly used in digital systems for synchronization and timing purposes. It is also widely used in telecommunications applications, as it is able to provide the needed timing to precisely sync computers and networks. Furthermore, it is typically found in embedded systems where accuracy and precision are essential.

SIT1602BI-11-33N-14.000000E is also popular in certain consumer electronics such as digital watches, cell phones, and toy robots, due to their low power consumption and reliable timing circuit. The oscillator is also often used as a system clock or reference clock, in order to maintain accurate and stabilized operation in the applications mentioned above.

Working Principle

SIT1602BI-11-33N-14.000000E is an oscillator based on a resonator circuit, typically in the form of an external voltage-controlled crystal oscillator. The oscillator amplifies the input voltage, normally provided by a signal generator, to an alternating voltage of sufficient magnitude.

The voltage-controlled oscillator (VCO) then uses this alternating voltage to generate a high frequency sine wave. This sine wave is then amplified and phase shifted by the amplifier circuit to produce a high frequency output with a frequency close to the desired frequency.

The output signal is then fed back to the input of the VCO, where it is compared to the reference signal. The difference in the frequencies is used to adjust the output frequency until it matches the reference signal.

Finally, the output of the VCO is connected to a frequency divider circuit, which divides the output frequency by a predefined value. This generates the stable output frequency which the oscillator is set to generate.

Conclusion

SIT1602BI-11-33N-14.000000E is a popular oscillator used in many digital, telecommunications, and embedded systems. The oscillator is based on a resonator circuit and a voltage-controlled oscillator which produces a high frequency sine wave. This signal is then multiplied and phase shifted to produce the desired frequency, and is then divided by a frequency divider to produce the stable output frequency.

The specific data is subject to PDF, and the above content is for reference