SIT1602BI-11-XXN-40.500000G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are special types of electronic circuits that can create repetitive signals, used to generate repeating waveforms. In electronic engineering, an oscillator is used to generate a periodic signal. This signal can be used to drive other circuits. For example, it can be the time-base for other timing-circuits or drive a power amplifier when producing audio signals.

The most common type of oscillator is the Pierce oscillator, which uses an external crystal to create a stable signal with a repeating waveform. It is often used with digital circuitry such as in mobile phones or computers. Other types of oscillators are available, including harmonic and ring oscillators, phase-locked loops (PLLs), and digital oscillators.

SIT1602BI-11-XXN-40.500000G is one type of oscillator. It is a Pierce oscillator with a maximum operating frequency of 40 MHz. The oscillator has a CMOS output drive and can supply a sine or square waveform. The amplitude of the sine wave can be programmable from 0-5V using a control input.

The operating principle of the SIT1602BI-11-XXN-40.500000G oscillator is based on the Pierce oscillator design. It consists of an external crystal which determines the output frequency, a CMOS inverter driving the crystal and an external voltage control input. The crystal is connected to two parallel capacitors, one to ground and the other in series with the control voltage input.

When a suitable voltage is applied, the crystal causes the charging and discharging of the capacitors which controls the output frequency. When no control voltage is applied, the oscillator generates a steady square wave at the frequency of the crystal. The output amplitude is determined by the value of the control voltage.

SIT1602BI-11-XXN-40.500000G oscillators are used in various applications such as clock-signal generation for digital circuit boards, frequency control and clock synchronization in digital communication systems, and synchronizing program memory and data memory operations in computers.

The oscillator offers several advantages over other types of oscillators, including good performance, low cost, low power consumption, and small packaging. It can be used in a wide range of applications such as television, mobile phones, and other consumer electronic products.

In conclusion, the SIT1602BI-11-XXN-40.500000G oscillator is a low cost, low power consuming, and highly stable Pierce oscillator which can be used to generate a stable and controllable frequency source in various applications.

The specific data is subject to PDF, and the above content is for reference