Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are devices that produce a repetitive waveform at a certain frequency. These waveforms can be used in many applications such as clocks, timers, logic circuits, and communication devices. The SIT1602BI-11-XXN-66.600000G is an oscillator that is commonly used in many of these applications. This article will discuss the application field and working principle of this oscillator.

Application Field

The SIT1602BI-11-XXN-66.600000G oscillator is a low-power, low-noise, and highly stable oscillator. It is typically used in system clock applications that require tight clock jitter specifications and very accurate frequency control. It is ideal for use in oscillator-controlled clock and data recovery applications, as well as communications systems where jitter requirements must be satisfied. Additionally, this oscillator is useful for applications such as PDH/PTN clocks, Switched Ethernet synchronization, and Gigabit Ethernet clocks.

Working Principle

The SIT1602BI-11-XXN-66.600000G oscillator is a voltage-controlled oscillator that utilizes a quartz crystal or ceramic resonator as its resonant element. It operates by producing a stable electrical signal at the desired frequency when a voltage is applied to it. The frequency of the oscillator is determined by the resonant element’s tuning characteristics. The output of oscillator is buffered in order to minimize distortion of the output waveform. The oscillator can be adjusted to different frequencies by changing the voltage applied to it.

Conclusion

The SIT1602BI-11-XXN-66.600000G oscillator is a useful device for many clock and communication applications that require tight jitter specifications and highly accurate frequency control. Its low power and noise characteristics make it an ideal choice for many applications. Its working principle involves the use of a quartz crystal or ceramic resonator to produce a stable electrical signal when a voltage is applied to it.

The specific data is subject to PDF, and the above content is for reference