SIT1602BI-12-18S-27.000000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic components that generate a continuous waveform, usually in the form of sine wave, square wave, or triangular wave. They are most commonly used in radio or digital communications systems, and are essential for proper functioning of many electronic systems.

SIT1602BI-12-18S-27.000000E is an example of an oscillator. It is a type of voltage controlled oscillator (VCO), which is an oscillator whose oscillation frequency is affected by a changing voltage, typically from 0 to 20V. This voltage can be used to modulate the frequency. This oscillator is designed for a frequency range of 12MHz to 18MHz. It has a nominal offset of 27.000000E and a maximum phase noise of -172 dBc/Hz at 10KHz offset.

The oscillator has a wide range of applications. It can be used to generate clock signals in digital logic circuits, as well as for communication and encoding purposes. It can also be used to generate a wide range of frequencies, from low frequencies to high frequencies. In addition, it can also be used in frequency synthesis and in radio frequency monitoring.

The working principle of SIT1602BI-12-18S-27.000000E is based on the idea that the frequency of an oscillator can be modulated by some external input signal. This input signal is usually a voltage. When the voltage is changed, the oscillator changes its frequency accordingly. The change in frequency will depend on the component values. The frequency is also influenced by the physical characteristics of the oscillator, such as its temperature, size, and shape.

This type of oscillator typically consists of an amplifier, a voltage controlled oscillator (VCO), and a frequency divider. The amplifier boosts the input signal and increases the performance of the oscillator. The VCO is the part that modulates the frequency by changing the voltage. The frequency divider divides the frequency into several parts.

As an example, if an oscillator with a frequency of 12MHz is connected to an amplifier with a gain of 5, the output of the amplifier will be a signal with a frequency of 60MHz. Then, when the VCO is added to the circuit, the changed voltage level will cause the oscillator to change its frequency accordingly. The output of the VCO is then divided by a factor of 10 to get the desired frequency.

SIT1602BI-12-18S-27.000000E is an important type of voltage controlled oscillator. It can be used in many electronic systems where the frequency must be accurately controlled. Furthermore, its reliability and accuracy make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference