SIT1602BI-12-18S-31.250000E

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	1.3µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.1mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	1.8V
Output:	HCMOS, LVCMOS
Function:	Standby (Power Down)
Frequency:	31.25MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of Oscillators

Oscillators are electronic components used to generate a periodic signal, usually a sine wave or a square wave, for frequency control or stabilization of electrical circuits. Typical oscillator applications include, but are not limited to, automatic frequency control, frequency stabilization, radio reception, and noise generation. Oscillators are typically divided into three main categories: voltage-controlled oscillators (VCO), phase-locked loop oscillators (PLL) and crystal oscillators (XO).

SIT1602BI-12-18S-31.250000E Application Field and Working Principle

SIT1602BI-12-18S-31.250000E is a type of crystal oscillator, which is used for frequency control and stabilization in a wide range of electronic circuits. It is suitable for a wide range of communication systems, particularly in the high-frequency (RF) range, such as cellular and wireless systems. This crystal oscillator works in the following ways:

Crystals and Oscillator Circuits

At the core of the SIT1602BI-12-18S-31.250000E is a quartz or ceramic crystal, which stores and transmits energy between its two terminals. The crystal is placed in a resonant circuit composed of two capacitors and one inductor that are connected among the three terminals on either side of the crystal. When a current is applied to the circuit, the crystal will start to oscillate at its resonant frequency.

Frequency Control and Adjustment

The SIT1602BI-12-18S-31.250000E’s frequency can be adjusted via an external input voltage. The higher the voltage, the higher the resonant frequency, and vice versa. This makes it ideal for applications such as frequency control, frequency stabilization, and noise generation.

Noise Reduction

Since crystal oscillators are very stable and precise, they can be used to reduce noise in a system. In the SIT1602BI-12-18S-31.250000E, the noise from the system is filtered out by the crystal and the resonant circuit. This helps improve the signal-to-noise ratio and ensure better stability of the device.

Conclusion

In summary, the SIT1602BI-12-18S-31.250000E is a type of crystal oscillator suitable for frequency control and noise reduction applications. It utilizes a quartz or ceramic crystal, which is combined with a resonant circuit to create a stable and precise signal. It also has the ability to adjust its frequency via an external input voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description