SIT1602BI-12-25S-40.000000E

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	2.5µA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.2mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	2.5V
Output:	HCMOS, LVCMOS
Function:	Standby (Power Down)
Frequency:	40MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are widely used in various applications such as modulation of radio signals, generation of synchronization pulses, and the synchronization of digital circuits. Oscillations are sustained by amplifying an electromagnetic signal and are used to create repetitive periodic signals. The SIT1602BI-12-25S-40.000000E oscillator falls under this category. This article will discuss the application field and working principle of the SIT1602BI-12-25S-40.000000E.

Application Field

The SIT1602BI-12-25S-40.000000E oscillator is a surface mount device (SMD) oscillator that can be used in a wide range of digital and timing circuits. It can be used in applications such as signal modulation, digital signal timing, and synchronization of digital circuits. It is a high accuracy oscillator with a low phase noise and very good jitter performance. The device provides up to 40MHz of output, making it ideal for applications that require a large number of clock cycles.

Working Principle

The SIT1602BI-12-25S-40.000000E oscillator operates on a negative RC coupling circuit. This circuit consists of an incoming signal that is amplified and sent through a resistor and a capacitor. The resistor and capacitor form a negative feedback loop which helps to maintain a steady and accurate clock signal. The input signal is then sent through an amplifier which provides the necessary voltage and current levels needed to drive the circuit. The output is then filtered to remove any unwanted noise. The filtered signal is then sent to the output terminals.

Conclusion

The SIT1602BI-12-25S-40.000000E oscillator is a versatile SMD oscillator that can be used in various digital and timing circuits. Its low phase noise and high accuracy make it suitable for a variety of applications. It operates on a negative RC coupling circuit and produces a steady and accurate clock signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description