SIT1602BI-12-25S-40.000000G

Oscillators

SIT1602BI-12-25S-40.000000G is a type of oscillator which is widely used in all kinds of electronic products. It is mainly used for generating a signal at a certain frequency and thus providing the clock signals necessary for the system operations.

Application field

SIT1602BI-12-25S-40.000000G oscillators are used in a wide variety of electronic devices such as computers, telecommunications, consumer electronics, industrial and military applications. They are suitable for quartz crystal oscillators, xtal oscillators and XO’s oscillators etc.

They are mainly used in devices running high-speed digital and mixed-signal applications as a timing device to ensure that the proper time signals are generated and transmitted. It is often used in data communication, radio communication, instrumentation and smart grid, navigation equipments, automatic control, audio-frequencies, and test and measurement devices.

Working principle

SIT1602BI-12-25S-40.000000G oscillators are built based on quartz crystal. Quartz crystal is the piezoelectric crystalline material, when quartz crystal in an alternating electric field with a certain frequency, it will produce mechanical vibration with the same frequency. This mechanical vibration will be converted into electrical signal, which is called resonance.

These oscillators consist of an oscillator crystal, a capacitance and an amplifier. When power is supplied to the oscillator, the circuits generate a signal of a certain frequency, the frequency is mainly determined by the quartz crystal. The frequency of quartz crystal can be changed by changing the capacitance of the circuit, thus controlling the output frequency of the oscillator.

Most of these oscillators use the Pierce oscillator circuit. This circuit uses three components, the quartz crystal, two resistors and an amplifier. When a voltage is applied to the circuit, the amplifier will generate a signal with a frequency determined by the quartz crystal and the two resistors will capacitively load the quartz crystal.

The output frequency of the oscillator can be adjusted by changing the capacitance of the circuit. The frequency of the output signal can be adjusted by increasing or decreasing the capacitance of the circuit.

SIT1602BI-12-25S-40.000000G oscillators are the most widely used oscillators in the field of electronics due to their stability and accuracy. They are reliable and can provide the necessary clock signals for a wide range of applications.