SIT1602BI-12-28N-6.000000E

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	2.8V
Output:	HCMOS, LVCMOS
Function:	--
Frequency:	6MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators have a wide range of applications. They are capable of generating and maintaining signals at various frequencies, patterns, and waveforms. One of these oscillators is SIT1602BI-12-28N-6.000000E, which has applications in many sectors and works on certain principles.The SIT1602BI-12-28N-6.000000E oscillator is a CMOS/TTL frequency-stable, low-frequency, low-cost oscillator. It can generate signals with a frequency range of 0.01MHz to 256MHz, and a temperature coefficient of ±3ppm to ±25ppm. It is widely used in consumer electronics, communications equipment, engine control units, and precision timing applications. In terms of its design, the SIT1602BI-12-28N-6.000000E oscillator uses a resonator that is composed of quartz or piezoelectric crystals. These crystals vibrate at precise frequencies when a voltage is applied. This creates a series of vibrations that cause the crystal to oscillate. The frequency of the oscillator is determined by the size and the shape of the resonator crystal. The SIT1602BI-12-28N-6.000000E oscillator also uses an amplifier circuit to create an output signal with the same frequency as the resonance frequency of the crystal. The amplifier converts the tiny electrical signal produced by the crystal into an amplified signal that is used for various applications. This signal is then connected to the rest of the circuit. The SIT1602BI-12-28N-6.000000E oscillator also uses a feedback loop to maintain the oscillations of the crystal. The feedback loop consists of a capacitor and resistor connected to the amplifier. As the oscillator signals are passed through this loop, the resistor and capacitor act as an impedance match that maintains the correct balance of the signals. This loop can also be used to adjust the frequency of the oscillator to the desired frequency. In summary, the SIT1602BI-12-28N-6.000000E oscillator is capable of generating signals with a frequency range of 0.01MHz to 256MHz. It works by using a resonator comprised of quartz or piezoelectric crystals, along with an amplifier circuit and a feedback loop. This type of oscillator is used in many industries, including consumer electronics, communications, and engine control units.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description