SIT1602BI-12-XXN-25.000625E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a type of electronic circuit that produce a continual output of alternating current (AC) with the same frequency and amplitude as an input voltage signal. SIT1602BI-12-XXN-25.000625E are oscillators that utilize a quartz crystal to generate a repetitive signal. This device is commonly used in applications such as frequency synthesis, timing, and frequency control.

The SIT1602BI-12-XXN-25.000625E oscillator consists of a quartz crystal, oscillation frequency determining capacitor, oscillation frequency determining resistor, buffer, and output amplifier. The quartz crystal is the key component in the device and is used to generate a frequency that is stable and precise. The quartz crystal is mechanically cut, with a specific frequency, density, and geometry.

In operation, the quartz crystal is placed in a vibrating electrical field that is generated by an alternating current source. The crystal will then begin to vibrate at its natural frequency, creating a series of electrical pulses. This signal is then filtered and amplified so that the output is a clean, single frequency that is produced in the required amplitude.

The main application of the SIT1602BI-12-XXN-25.000625E oscillator is in frequency synthesis for radio warm and receivers. This device can be used to precisely generate a steady signal in the range of tens of MHz and will not drift significantly over time. This type of oscillator is also used for generating accurate time signals, such as in clocks, GPS receivers, and other timing devices.

In addition to frequency synthesis and time signal generation, the SIT1602BI-12-XXN-25.000625E oscillator can be used for frequency control. This device can be used to adjust the frequency of other oscillators or to synchronize multiple devices. These oscillators can also be used in equipment such as transceivers, signal converters, and frequency shifters.

Overall, the SIT1602BI-12-XXN-25.000625E oscillator is an ideal choice for applications that require precise, stable frequency signals. This device utilizes a quartz crystal to generate a precise frequency and can be used for frequency synthesis, timing, and frequency control. With its wide range of applications, this type of oscillator is essential for any well-equipped laboratory or design studio.

The specific data is subject to PDF, and the above content is for reference