SIT1602BI-13-28N-31.250000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuit elements used to produce a steady signal with a predetermined frequency. They are used in many applications, such as radio transmitters and receivers, radar, computers, navigation systems, biomedical instrumentation, and so on. SIT1602BI-13-28N-31.250000Dis one type of oscillator that employs several components to generate and control its output signal.

The SIT1602BI-13-28N-31.250000D consists of a passive resonant network, an active device (such as a bipolar transistor or FET) and a power supply. The resonant network is usually an LC (inductor-capacitor) combination, consisting of an inductor and capacitor in series, tuned to the desired output frequency. A bias resistor is connected between the transistor base terminal or gate terminal and ground, which controls the amount of current. The active device is used to provide an active gain, and the power supply provides the operating voltage for the circuit.

The SIT1602BI-13-28N-31.250000D oscillator is most commonly used in devices where stability and accuracy of the output frequency are critical. These include frequency synthesizers, broadcast transmitters, frequency-controlled phase-locked loop systems, and frequency reference for instrumentation systems. Typically, oscillation frequencies are from 1 KHz to 100 MHz and above. The relatively low cost of the oscillator makes it attractive for a variety of applications.

The working principle of the SIT1602BI-13-28N-31.250000D oscillator is based on the oscillation of electrons around an atom. When a DC voltage is applied to the resonant circuit, the LC network resonates at its natural frequency and the electrical energy is transferred back and forth between the inductor and capacitor. This energy is alternately stored in the inductor field and the capacitor. The energy is also transferred to the active device (transistor). The transistor amplifies the oscillation and sends it back into the LC network to form a feedback loop. The process repeats itself continually and generates an oscillating waveform at the output.

The SIT1602BI-13-28N-31.250000D oscillator is designed to provide superior accuracy and stability over a wide frequency range. It is an ideal choice for applications where frequency accuracy and stability are of paramount importance. The oscillator can be used in a variety of applications, including frequency synthesizers, broadcast transmitters, frequency-controlled phase-locked loop systems, and instrumentation systems.

The specific data is subject to PDF, and the above content is for reference