SIT1602BI-13-33E-4.000000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

SIT1602BI-13-33E-4.000000D oscillators are used to provide highly precise and stable timing signals for various electronic systems. The oscillator is composed of a quartz crystal and several capacitors and inductors. It is operated by means of a voltage controlled oscillator (VCO), which is set by the crystal frequency.

When an AC signal is applied, the crystal allows the current to oscillate between its two terminals. The frequency of the oscillation depends on the size of the crystal, as well as its temperature and any air pressure present. This oscillation creates an oscillating voltage at its terminals, which is the signal that is output from the oscillator circuit. The oscillator\'s frequency is then set by the voltage that is applied to the VCO.

The oscillator is designed to operate within a narrow frequency range, and it typically has a frequency accuracy of better than 0.1 ppm (part per million). This accuracy is important for measuring precise time intervals in the operation of microprocessor-based systems. The oscillator also typically has an output waveform that is either sine or triangular (square) in shape.

SIT1602BI-13-33E-4.000000D oscillators offer a wide range of applications including cell phones and other wireless devices, navigation systems, and medical and industrial equipment. The crystal accuracy of such oscillators is especially important in radio frequency communications systems where it is imperative to keep the signal frequency stable. These oscillators are also used in test and measurement equipment, electronics, and many other industrial applications.

Oscillators are also used in digital signal processing systems to generate square or sinusoidal waveforms. The waveform is generated by a mathematical equation, which is then fed to the oscillator. This signal is then used to control various functions such as frequency modulation, phase modulation, and pulse width modulation. Another important application of oscillators is in digital-analog conversion. Here the signal from the oscillator is used to convert an analog signal into a digital signal.

SIT1602BI-13-33E-4.000000D oscillators are also widely used in avionic systems such as navigation and communication systems. Here the oscillator is used to generate a base carrier frequency, which is then used to generate the various signals required to operate the system. These signals include subcarrier frequencies, pilot pulses, servo inputs, and system synchronization pulses.

Oscillators are also used in medical equipment, such as heart rate monitors and hearing aids. Here the oscillator is used to generate a regular signal which is then used to measure and monitor the patient\'s heart rate or hearing sensitivity. Oscillators are also sometimes used as part of an embedded system, such as a remote sensing device, where they regulate the system\'s internal clock.

The specific data is subject to PDF, and the above content is for reference