SIT1602BI-21-18E-66.660000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are important components in many electronic devices. The SIT1602BI-21-18E-66.660000E is a symmetrical oscillator widely used in a variety of electronics applications. It features a low noise figure and wide frequency range. In this article, I will explain the application field and working principle of the SIT1602BI-21-18E-66.660000E oscillator.

The SIT1602BI-21-18E-66.660000E oscillator has a wide frequency range of 66.660000E MHz. It can be used for many different applications, including modulators, crystal oscillators, clock multipliers, radio frequency systems, frequency dividers, filters, and more. This oscillator is also suitable for use in digital-analog high-precision signal processing systems.

In terms of its working principle, the SIT1602BI-21-18E-66.660000E oscillator is driven by a sine wave. The sine wave is generated by an inverter circuit, which is composed of two transistors. These two transistors are connected in series and are driven by a pulse wave with a frequency of 66.660000E MHz. The input of this inverter circuit is connected to a feedback loop.

The feedback loop is composed of a low-pass filter, a high-pass filter, and an adjustable resistor. The low-pass filter provides a low frequency response, while the high-pass filter attenuates the higher frequencies. The adjustable resistor is used to control the gain of the oscillator. When the gain is greater than unity, an oscillation will occur. The frequency of the oscillation is determined by the feedback loop.

The output of the SIT1602BI-21-18E-66.660000E oscillator can be high or low. It can also be used for a variety of applications, such as frequency modulation, frequency division, and clock modulation. In frequency modulation, the output frequency can be shifted up or down according to the input signal. In frequency division, the output frequency is divided by a predetermined factor. In clock modulation, the output clock frequency can be increased or decreased depending on the input clock frequency.

In summary, the SIT1602BI-21-18E-66.660000E oscillator has a variety of applications and can be used for many different types of signal processing. Its working principle is based on an inverter circuit which is driven by a sine wave and is controlled by a feedback loop. The output of the oscillator can be either high or low and can be used for various types of modulation.

The specific data is subject to PDF, and the above content is for reference