SIT1602BI-21-30S-66.660000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators is the regularly repeating motion of some physical system. This motion or repetition of the physical system can be described mathematically in the form of sinusoidal waveforms. 

SIT1602BI-21-30S-66.660000E application field and working principle

The SIT1602BI-21-30S-66.660000E is a High Frequency (-100MHz) Low Noise Oscillator used in many applications, including medical, military and aerospace system. It is a high frequency oscillator with a frequency range of 30 to 66.660000EHz and a relatively low noise. It is used in a wide range of applications, from oscillating circuit components to frequency transducer circuits to microwave signal generation. The SIT1602BI-21-30S-66.660000E oscillator is based on the PLL circuit, which is composed of a voltage controlled oscillator (VCO), phase detector and low-pass filter.

The VCO is the core of the oscillator, it converts the control voltage into an oscillatory signal. The output is adjusted by controlling the frequency of the input signal through the use of a tuning voltage. The output frequency of the VCO is determined by the ratio of the capacitance and inductance of the circuit and this signal is then fed into the phase detector. The phase detector is used to compare the reference frequency with the VCO signal. If they differ in phase, the phase detector will generate an appropriate control voltage to adjust the VCO output. Finally, the low pass filter is used to filter out any noise generated by the VCO.

This oscillator has many advantages. Firstly, it is capable of producing very accurate frequencies with minimal phase noise. Also, since the system is composed of discrete components, it can be easily programmable and reconfigured to generate a range of frequencies. In addition, this oscillator is also very reliable as its components are all rugged and long-lasting. It is also resistant to shock and vibration, and therefore suitable for use in harsh environments. Finally, this oscillator is relatively cheap and thus is ideal for use in mass production.

In conclusion, the SIT1602BI-21-30S-66.660000E is a high frequency, low noise oscillator which is versatile, reliable and cheap, and is well-suited for a variety of applications.

The specific data is subject to PDF, and the above content is for reference