SIT1602BI-22-18E-25.000000E

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	4mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.1mA
Operating Temperature:	-40°C ~ 85°C
Series:	SiT1602B
Voltage - Supply:	1.8V
Output:	HCMOS, LVCMOS
Function:	Enable/Disable
Frequency:	25MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

SIT1602BI-22-18E-25.000000E is a type of oscillator circuit which is used in many different applications. It is based on the concept of a single-ended oscillator and is capable of producing consistent and accurate frequency outputs. This oscillator has a wide range of applications, such as in television receiver circuits, radio frequency (RF) circuits, switching power supplies, and even in digital signal processing. It is also used in electronic experiments and research.

Working Principle

The SIT1602BI-22-18E-25.000000E oscillator is a high-precision oscillator that uses a single-ended oscillator topology. This oscillator utilizes an RC time constant to produce an output frequency. When the capacitor charges and discharges, it creates a soft wave pulse that keeps a steady state of positive voltage. This wave pulse is then amplified by an amplifier, and the oscillator converts it into a square-wave signal. The output frequency is determined by the feedback resistor.

Circuit Configuration

The overall circuit configuration of the SIT1602BI-22-18E-25.000000E oscillator circuit consists of an amplifier, a transistor, and a capacitor. The amplifier, usually a low-frequency amplifier, is responsible for producing the square-wave signal. The transistor is used to switch the current through the capacitor, thus changing the states of the capacitor from charging to discharging. The capacitor is used to store the charge.

Output Waveform

The output waveform of the SIT1602BI-22-18E-25.000000E oscillator circuit is an alternating square wave. This waveform is composed of alternate positive and negative cycles. The frequency of the waveform is determined by the time constant of the RC circuit.

Applications

The applications of the SIT1602BI-22-18E-25.000000E oscillator are varied. This oscillator circuit is used in television receiver circuits, radio frequency (RF) circuits, switching power supplies, and even in digital signal processing. It can also be used in electronic experiments and research.

Conclusion

The SIT1602BI-22-18E-25.000000E oscillator is a type of high-precision oscillator which uses a single-ended oscillator topology. It produces an alternating square wave whose frequency is determined by the RC time constant. This type of oscillator is used for a wide range of applications, from television receiver circuits, to radio frequency (RF) circuits, to switching power supplies, and even in digital signal processing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description