SIT1602BI-22-28N-10.000000D

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	4.5mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	SiT1602B
Voltage - Supply:	2.8V
Output:	HCMOS, LVCMOS
Function:	--
Frequency:	10MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components that generate oscillating electrical signals. They are widely used in a variety of electronic devices and computer systems. Oscillators play an important role in the smooth functioning of all modern electronics. The SIT1602BI-22-28N-10.000000D oscillator is a silicon controlled rectifier (SCD) oscillator that can be used in a variety of applications, such as pulse modulation and precision timing. It is designed to provide clean, stable, and reliable performance at frequencies up to 10 Mhz. This oscillator is used in the DC-DC converter, microprocessor clock, analog power supplies, audio amplifiers, switch mode power supplies, and voltage clamp oscillators. The SIT1602BI-22-28N-10.000000D oscillator consists of two components: a silicon controlled rectifier (SCD) and an external resistor-capacitor (RC) network. The SCD consists of three electrodes: an anode, a gate, and a cathode. The anode is connected to a DC voltage source and the cathode is connected to the negative terminal of the power supply. The gate of the SCD controls whether current flows or is blocked between the anode and cathode. When the gate voltage is less than the anode voltage, current flows and the SCD is “on”. When the gate voltage is greater than the anode voltage, current flow is blocked and the SCD is “off”. The external RC network is connected between the anode and cathode of the SCD. When the SCD is “on”, the RC network is charged, and when the SCD is “off”, the RC network discharges. This cycle of charging and discharging repeats itself, generating a recurrent sawtooth waveform. The frequency of the waveform is determined by the values of the resistor and capacitor in the RC network. To ensure stable performance, the SIT1602BI-22-28N-10.000000D oscillator is designed with power supply decoupling, voltage clamp protection, and electrostatic discharge (ESD) protection. Power supply decoupling helps reduce power supply noise, which can cause signal drifts and jitter. Voltage clamp protection helps protect the oscillator from overvoltage and overcurrent faults. ESD protection helps avoid damage caused by accidental static electricity. In summary, the SIT1602BI-22-28N-10.000000D is a reliable and cost-effective oscillator, designed to provide clean, stable, and precise signals at frequencies up to 10MHz. This oscillator is suitable for a variety of applications, including pulse modulation and precision timing. It is also designed with power supply decoupling, voltage clamp protection, and ESD protection for stable performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description