SIT1602BI-22-33E-33.000000D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic components that generate oscillating signals whose frequency is determined by an external circuit or electrical component, such as a resistor, capacitor, or inductor. They are commonly used in electronics for a number of applications such as clock generators, resonators, data converters and signal transmitters. One type of oscillator is the SIT1602BI-22-33E-33.000000D oscillator, which is a voltage-controlled oscillator (VCO) with a wide range of operating frequencies.

SIT1602BI-22-33E-33.000000D Application Field and Working Principle

The SIT1602BI-22-33E-33.000000D oscillator is a voltage controlled oscillator (VCO) that operates in the frequency range of 0.1 to 10MHz. It is designed to generate stable signals for microwave radio applications. The oscillator is suitable for applications requiring high frequency stability, such as switching applications and pulse-parallel modulation. It can also be used for pulse-serial modulation, frequency hopping, band hopping, spread spectrum communication, and frequency control.

The working principle of the SIT1602BI-22-33E-33.000000D oscillator is based on the Pierce-coupled-oscillator topology. In this topology, two inverter stages are coupled together with one transistor in series between them. The output of the first stage is connected to the gate of the second stage, and the drain of the second stage is also connected to the gate of the first stage. By varying the voltage applied to the gates of the transistor, the frequency of oscillation can be adjusted. The frequency range can be adjusted over a wide range by fine-tuning the gate-source voltage of the transistor.

The SIT1602BI-22-33E-33.000000D oscillator is designed with a high-speed active circuitry which helps to reduce the noise and improve the stability of the oscillator. The design also includes a temperature compensation circuit for low-temperature coefficient stability and stability over voltage. The output of the oscillator is also well-suited for high-frequency applications as the output can be adjusted to provide different pulse-widths.

The SIT1602BI-22-33E-33.000000D oscillator is a versatile component with wide-reaching applications. It is well-suited for a variety of microwave applications such as pulse-parallel modulation, frequency control, frequency measurement, rapid frequency hopping, spread spectrum communication, and pulse-serial modulation. In addition, the oscillator can also be used for data transmission, amplifiers, filters, and signal generators. The oscillator is also widely used in medical devices, test and measurement equipment, and other high-frequency applications.

The specific data is subject to PDF, and the above content is for reference